Tag Archives: brake

For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads

For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads

For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
IMPORTANT CHECK YOUR COMPATIBILITY. FITS THE FOLLOWING VEHICLE(S). Fitment based on U. Actual product may vary from photo. 2 Front and 2 Rear eLine Series Drilled and Slotted Brake Rotors. Front & Rear R1 Ceramic Series Brake Pads. Approximately 15,000 reported car accidents occur each day. Stopping faster means stopping safer. Whether youre taking your children to a dance recital or hitting the town with your friends, you need to be able to remain in complete control of your vehicle. Reliable and durable, eLINE Series Brake Rotors will get you to your destination safely no matter where youre going. Better braking performance made affordable. ELINE Series Brake Rotors provide high-quality stopping power at a low and affordable cost. With our state-of-the-art technology, you dont need to choose between performance and budget: its all there in a single package. Your brake rotors will last longer, cost you less, and ensure your vehicles safety for thousands of miles to come. Importance of changing your brake disc. Are your brakes wobbling? When you notice erratic behavior from your brakes, it nearly always means that your brakes need to be serviced immediately. A failure to properly maintain and replace your disk brake system will eventually cause your brake system to fail and that could have disastrous results. Failing to change your brake pads or rotors as needed will also cause additional wear and damage to your car over time, which can be quite costly to repair. WHY UPGRADE TO eLINE SERIES VS. Zinc Plated for corrosion protection. All of our eLINE Series Brake Rotors, excluding our blank pattern rotors, come with a special zinc plating designed to protect from corrosion. Though some of this corrosion protection will inevitably wear off through use, the rest of the rotor will remain protected. This leads to better appearance, longer life, and overall improved maintenance and replacement costs. Our eLINE Series Brake Rotors are available in silver, black, and gold. Please be advised that when you first receive the rotors, they are completely covered with the silver zinc coating. During the initial embedding process, the silver zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. Includes Shims to Reduce Brake Noise. For Any Vehicle that Needs that Extra Brake Bite! R1 CERAMIC SERIES BRAKE PADS. Provides long lasting braking power without having the squeal of an actual race pad. Works great on any vehicle that needs that extra brake bite. It doesn’t matter if it is quick stops in traffic or that spirited drive down your favorite backroad. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -Rob_67. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! Ships within 24-72 Hours! Shop R1 Concepts Brake Products. ELINE Series Brake Rotors. R1 Carbon GEOMET Series Brake Rotors. R1 Concepts Brake Pads. R1 Concepts Brake Sensors. R1 Concepts Brake Hardware. R1 Concepts Brake Calipers. R1 Concepts Brake Drum. G2 Caliper Paint Kit. What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Other brake product FAQS. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Aim / Skype / Twitter / Yahoo : r1concepts. The item “For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads” is in sale since Saturday, April 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “r1concepts” and is located in Cerritos, California. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: R1 Concepts Eline Series
  • Manufacturer Part Number: CEC.42134.02
  • Brake Disc Style: Drilled & Slotted
  • Fitment Type: Direct Replacement
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • California Prop 65 Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov
  • ZINC: Silver Zinc Plated
  • Warranty Length: 1 Year Warranty
  • Front Rotor Size (mm): 319.8
  • Rear Rotor Size (mm): 307.8
  • Vented Or Solid Front Rotor: Vented
  • Vented Or Solid Rear Rotor: Vented
  • Lug/Bolt Circle: 5×114.3
  • Front Rotor Thickness (mm): 28
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Rear Rotor Thickness (mm): 16
  • Images: Images are samples, actual product may vary.

For 2014-2018 Infiniti Q50 Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads

GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body

GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body

GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body
GM 4 Wheel Disc Brake Conversion Kit With Factory Height Spindles Front & Rear Disc Brake Kit. This is Our Premium Kit with Drilled & Slotted Rotors. Brand New Front Disc Brake Kit to Converter your Front Drum Brakes to Disc Brakes o r Replace Existing Front Disc Brakes. Fits GM F Body 1967 (Camaro & Firebird). Listing Includes For the Front Brakes. (1) Brand New 11 Power Brake Booster. (1) Brand New Master Cylinder For Disc/Disc. (1) Brand New Proportional Valve Kit For Disc/Disc. (2) Brand New Disc Brake Drilled & Slotted Rotors. (2) Brand New Brake Calipers With New Brake Pads. (2) Brand New Brake Caliper Brackets. (2) Brand New Dust Shields. (2) Brand New Flex Brake Lines. (1) Bearing, Seal & Hardware Kit for Left & Right Side. GM 10 & 12 Bolt Rear Disc Brake Conversion Kit. (2) Brand New 11 Disc Brake Drilled & Slotted Rotors. (2) Brand New Rear Brake Calipers With New Brake Pads & Parking Brake. (2) Brand New Emergency Brake Cables. (1) Hardware Bracket Kit for Left & Right Side. Special Note: Kit Will Not Fit Staggered Shock Rear Ends. Requires a Minimum 15 Wheel. Rotors will fit a 6 Axle Flange. If your Axle Flange is Bigger then 6 you will have to Machine Axle Flange for Fitment. Scorpion Suspension & Brake Products, Quality Parts at an Affordable Price. The item “GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body” is in sale since Thursday, January 2, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “02starrider” and is located in King, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • GM Front Disc Brake Kit: GM A,F,X Body 4 Wheel Disc Brake Conversion Kit
  • Rotor Style: Drilled
  • Manufacturer Part Number: DBK6472LX / DBK1012LX Set
  • Placement on Vehicle: Front
  • Brand: Scorpion
  • Fitment Type: Performance/Custom
  • Solid or Vented Rotor: Vented
  • Warranty: 90 Day
  • Mounting Hardware Included: Yes

GM 4 Wheel Disc Brake Conversion Kit Drilled & Slotted Rotors A, F, X Body

For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads

For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads

For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads
IMPORTANT CHECK YOUR COMPATIBILITY. FITS THE FOLLOWING VEHICLE(S). Fitment based on U. V6 FLEX DOHC Naturally Aspirated::Front and Rear. V6 GAS DOHC Naturally Aspirated::w/o HD Brakes;Front and Rear. V6 FLEX DOHC Naturally Aspirated::w/o HD Brakes;Front and Rear. Actual product may vary from photo. 2 Front and 2 Rear eLine Series Drilled and Slotted Brake Rotors. Front & Rear R1 Ceramic Series Brake Pads. Approximately 15,000 reported car accidents occur each day. Stopping faster means stopping safer. Whether youre taking your children to a dance recital or hitting the town with your friends, you need to be able to remain in complete control of your vehicle. Reliable and durable, eLINE Series Brake Rotors will get you to your destination safely no matter where youre going. Better braking performance made affordable. ELINE Series Brake Rotors provide high-quality stopping power at a low and affordable cost. With our state-of-the-art technology, you dont need to choose between performance and budget: its all there in a single package. Your brake rotors will last longer, cost you less, and ensure your vehicles safety for thousands of miles to come. Importance of changing your brake disc. Are your brakes wobbling? When you notice erratic behavior from your brakes, it nearly always means that your brakes need to be serviced immediately. A failure to properly maintain and replace your disk brake system will eventually cause your brake system to fail and that could have disastrous results. Failing to change your brake pads or rotors as needed will also cause additional wear and damage to your car over time, which can be quite costly to repair. WHY UPGRADE TO eLINE SERIES VS. Zinc Plated for corrosion protection. All of our eLINE Series Brake Rotors, excluding our blank pattern rotors, come with a special zinc plating designed to protect from corrosion. Though some of this corrosion protection will inevitably wear off through use, the rest of the rotor will remain protected. This leads to better appearance, longer life, and overall improved maintenance and replacement costs. Our eLINE Series Brake Rotors are available in silver, black, and gold. Please be advised that when you first receive the rotors, they are completely covered with the silver zinc coating. During the initial embedding process, the silver zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. Includes Shims to Reduce Brake Noise. For Any Vehicle that Needs that Extra Brake Bite! R1 CERAMIC SERIES BRAKE PADS. Provides long lasting braking power without having the squeal of an actual race pad. Works great on any vehicle that needs that extra brake bite. It doesn’t matter if it is quick stops in traffic or that spirited drive down your favorite backroad. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -Rob_67. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! Ships within 24-72 Hours! Shop R1 Concepts Brake Products. ELINE Series Brake Rotors. R1 Carbon GEOMET Series Brake Rotors. R1 Concepts Brake Pads. R1 Concepts Brake Sensors. R1 Concepts Brake Hardware. R1 Concepts Brake Calipers. R1 Concepts Brake Drum. G2 Caliper Paint Kit. What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Other brake product FAQS. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Aim / Skype / Twitter / Yahoo : r1concepts. The item “For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads” is in sale since Saturday, April 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “r1concepts” and is located in Cerritos, California. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: R1 Concepts Eline Series
  • Pad Material: Ceramic Low Dust
  • Manufacturer Part Number: CEC.62116.02
  • Brake Disc Style: Drilled & Slotted
  • Fitment Type: Direct Replacement
  • Interchange Part Number: Aimco: 55157
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • California Prop 65 Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov
  • ZINC: Silver Zinc Plated
  • Brake Pad Compound: Ceramic Low Dust
  • Warranty Length: 1 Year Warranty
  • Front Rotor Size (mm): 316
  • Rear Rotor Size (mm): 315
  • Vented Or Solid Front Rotor: Vented
  • Vented Or Solid Rear Rotor: Vented
  • Lug/Bolt Circle: 5×120
  • Front Rotor Thickness (mm): 30
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Rear Rotor Thickness (mm): 23
  • Images: Images are samples, actual product may vary.

For 2008-2011 Cadillac CTS Front Rear eLine Drill Slot Brake Rotors+Ceramic Pads

Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150

Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150
Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150
Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150
Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150
Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150
Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150
Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150

Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150
Models with Mechanical Parking Brake Only. (Will Not Fit Vehicles with Electric Parking). ALL NEW Drilled and Slotted Brake Rotor Set With Premium Ceramic Brake Pads. This Kit Includes 2 Front Brake Rotors and 1 Set of Front Brake Pads and 2 Rear Brake Rotors and 1 Set of Rear Brake Pads. AGAIN WEEKENDS AND HOLIDAYS ARE EXCLUDED. There is absolutely No modifications required to the product or your vehicle to install the Brake Pads or Brake Rotors. Customer is responsible for fright charges to return the alleged defective product. G3008 Castings Machined To OE Specifications And Designed To An Exact OE Fit. No Modifications Needed For Installation. Cross Drilled To Promote Air Flow To Help Keep The Brakes Cool During Normal Or Aggressive Driving Conditions. Slots Pass Through The Edge Of The Rotor Allowing Water and Debris To Disperse From The Rotor Surface Which Keeps The Brakes Smooth And Quiet. Non Directional Finish Reduces Noise And Makes For An Easy Break In Process. Black Powder Coating looks great out of the box and will continue to look good long after it has been installed. Brake Pad Set Features. Premium Ceramic Brake Pads. No Petroleum Based Based Adhesives To Bond The Friction Materials Together Which Means The Dust That Is Created Will not Stick To Your Wheels. Slotted and Chamfered to Original Equipment Specifications. Duel Layered Rubberized Shims. Q: How quick can I get my order? Q: Do slots really help? A: Absolutely if done right. Slots help clear debris from the friction surface, however slots that do not continue to the rotors edge can actually trap debris. Manufactures that do not slot all the way to the edge often use cheaper metals in the manufacturing process and would crack if slotted to the edge. Q: Why don’t you use zinc plating? A: There are several reasons why we don’t use zinc. Zinc plating is applied at the end of the manufacturing process. This can cause disc thickness variation. Zinc plating does not last very long. Most wheel cleaners will remove zinc plating so if you choose to use zinc plated rotors please read your wheel cleaner labels carefully. Zinc plating can form deposits in the friction material and cause braking issues like vibration or fade. Bottom line is that we choose to provide you with a product that looks great out of the box and will continue to look good long after it has been installed. Q: What makes our brake pads better than the competition? A: There has been extensive testing on the material before it went into production. The material out performs and outlasts other products, is aggressive enough for the driver who goes red light to red light, yet performs just as well for the driver that just wants to cruise and just as good for the highway driver. The Low Dust Formula created for us is exactly as advertised a TRUE LOW DUST material. Ships within 24 Hours- Payments that are received after 1:00 p. The item “Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150″ is in sale since Saturday, October 21, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “tripplejsupply14″ and is located in Elgin, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Modified Item: Yes
  • Superseded Part Number: Brake Kit, Brake Set, Brake Disc
  • Rotor Style: Drilled
  • Country/Region of Manufacture: China
  • Custom Bundle: Yes
  • Interchange Part Number: F150; 2WD; 4WD
  • California Prop 65 Warning: Cancer & Reproductive harm www.p65warnings.ca.gov
  • Pad Material: Ceramic
  • OE Spec or Performance/Custom: OE Spec
  • Years: 2012, 2013, 2014, 2015, 2016, 2017
  • Surface Finish: Non Directional
  • Manufacturer Part Number: F19001, 12, 13, 14, 15, 16, 17
  • Images:: Images are Samples Only. Actual Product may Vary
  • Modification Description: Brake rotors are Drilled and Slotted, then have a Black Powder Coating Paint applied to them.
  • Placement on Vehicle: Left
  • Brand: Approved Performance
  • Fitment Type: Direct Replacement
  • Solid or Vented Rotor: Vented
  • Warranty: 1 Year
  • Mounting Hardware Included: No
  • Bundle Description: 4 Brake Rotors with 2 Sets of Brake Pads. Kit will complete the brakes on all 4 wheels of the Vehicle.

Front and Rear Brake Rotors Drilled & Slotted with Ceramic Pads 2012-2017 F150

Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads

Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads
Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads
Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads
Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads
Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads
Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads

Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads
2 FRONT + 2 REAR. 4 FRONT + 4 REAR. L4 GAS DOHC Naturally Aspirated::4WD;Front and Rear. Hart brakes rotors are finished with black zinc plating which helps prevents rotors from rust, oxidation, and oxididation. Cross drilled holes help keep the rotors cooler by ventilating air through the product. Diamond slots improve the brakes system performance by wiping away the debris of used friction material. It also helps prevent the brakes pads from glazing and improves initial brakes response under wet conditions. Our rotors are finished with black zinc plating. Prevents rotors from rust, oxidation, and oxididation. Please be advised that when you first receive the rotors, they will be completely zinc plated. After the initial break-in procedure where the pads come in contact with the rotor, the zinc will wear off, leaving the hat and inner vane structure silver. LONGEST WEARING MOST ADVANCE MATERIAL AVAILABLE. 100% SCORCHED FOR EASY BED-IN. 100% SHIMMED TO ELIMINATE NOISE AND VIBRATION. POSITIVE MOLDED FOR EVEN WEAR CHARACTERISTICS. STABLE FRICTION PERFORMANCE ACROSS A WIDE TEMPERATURE RANGE. ARE THE PRODUCTS BRAND NEW? All of our US Direct Parts items are 100% brand new. DO YOU NEED ADDITIONAL INFORMATION ABOUT MY VEHICLE? At checkout, please include the year, make, and model. Also include additional information. Ex: engine size (liters), 2wd, 4wd, 4 cyl or V6, turbo or non-turbo, abs or non-abs, etc. ARE THERE ANY SPECIAL MODIFICATIONS NECESSARY TO INSTALL THESE ROTORS? All of our brakes rotors are Original Equipment Manufecturer (OEM) spec. HOW LONG CAN I EXPECT MY NEW brakes TO LAST ME? All of our brakes parts are designed with longevity in mind, but it will depend on many different factors such as the type of vehicle you are driving, type of driver you are aggressive driver, normal driver, etc. , different outputs of your engine, or even your different driving environment. For example, a stop and go driver in traffic will have a shorter rotor life than one that drives mostly on an open highway. WILL MY ROTORS STAY COMPLETELY BLACK? When you first receive your order they will be completely black. After initial brakes-in procedure, where the pad and the rotor comes into contact, the black will wear off leaving the hub, edge, and inner vanes black. WHAT COATING DO THE ROTORS HAVE? The drilled/slotted brake rotors can with silver, black, or gold zinc plating. The plain non drilled or slotted blank rotors do not come with zinc plating. The zinc coating on the brake surface will rub off after the initial bed-in period. The braking surface, the cross drills holes and/or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for a long extended period. Please be aware that zinc plating aide against rust but not prevent rust indefinitely. The report must include information and/or test results that prove the rotor(s) to be at warped. US Direct Parts is not responsible and will not pay for any outside cost such as storage, mechanical work or diagnostic testing. All brake pads, regardless of type or brand will have a chance to make noise. Brake pad noise does not mean the pads are bad or defective. There are many variables that can affect brake noise. Actual packaging may vary from image. ARE THE ROTORS AND PADS IMAGES THE ACTUAL ITEMS I WILL RECEIVE? Actual items can vary due to fitment specification. DO NOT confirm your fitment base on images. Please check fitment details for things such as trim, sub-models, production date, etc thoroughly to ensure proper fitment. HOW DO WE REACH YOU IF WE HAVE FURTHER QUESTIONS? But we also get customers who prefer to talk to a live professional that can help you get the right part right away. The item “Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads” is in sale since Thursday, May 10, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “usdirectparts” and is located in Garden Grove, California. This item can be shipped worldwide.
  • Brand: HartBrakes
  • Pad Material: Ceramic Low Dust
  • Manufacturer Part Number: PHCC.42102.02
  • Brake Disc Style: Drilled
  • Rotor Style: Drilled
  • Fitment Type: Direct Replacement
  • Interchange Part Number: Aimco: 31412
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • California Prop 65 Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov
  • ZINC: Silver Zinc Plated
  • Brake Pad Compound: Ceramic Low Dust
  • Warranty Length: 1 Year Warranty
  • Front Rotor Size (mm): 295.75
  • Rear Rotor Size (mm): 285.5
  • Vented Or Solid Front Rotor: Vented
  • Vented Or Solid Rear Rotor: Vented
  • Lug/Bolt Circle: 6×114.3
  • Front Rotor Thickness (mm): 28
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Rear Rotor Thickness (mm): 18

Fits Nissan Xterra, Frontier Front Rear Drill Slot Brake Rotors+Ceramic Pads

FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L

FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L
FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L
FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L
FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L
FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L
FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L

FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L
2 FRONT + 2 REAR. 4 FRONT + 4 REAR. Ford MUSTANG [2005, 2006, 2007, 2008, 2009, 2010] V6 – 4.0L. Hart brakes rotors are finished with black zinc plating which helps prevents rotors from rust, oxidation, and oxididation. Cross drilled holes help keep the rotors cooler by ventilating air through the product. Diamond slots improve the brakes system performance by wiping away the debris of used friction material. It also helps prevent the brakes pads from glazing and improves initial brakes response under wet conditions. Our rotors are finished with black zinc plating. Prevents rotors from rust, oxidation, and oxididation. Please be advised that when you first receive the rotors, they will be completely zinc plated. After the initial break-in procedure where the pads come in contact with the rotor, the zinc will wear off, leaving the hat and inner vane structure silver. LONGEST WEARING MOST ADVANCE MATERIAL AVAILABLE. 100% SCORCHED FOR EASY BED-IN. 100% SHIMMED TO ELIMINATE NOISE AND VIBRATION. POSITIVE MOLDED FOR EVEN WEAR CHARACTERISTICS. STABLE FRICTION PERFORMANCE ACROSS A WIDE TEMPERATURE RANGE. ARE THE PRODUCTS BRAND NEW? All of our US Direct Parts items are 100% brand new. DO YOU NEED ADDITIONAL INFORMATION ABOUT MY VEHICLE? At checkout, please include the year, make, and model. Also include additional information. Ex: engine size (liters), 2wd, 4wd, 4 cyl or V6, turbo or non-turbo, abs or non-abs, etc. ARE THERE ANY SPECIAL MODIFICATIONS NECESSARY TO INSTALL THESE ROTORS? All of our brakes rotors are Original Equipment Manufecturer (OEM) spec. HOW LONG CAN I EXPECT MY NEW brakes TO LAST ME? All of our brakes parts are designed with longevity in mind, but it will depend on many different factors such as the type of vehicle you are driving, type of driver you are aggressive driver, normal driver, etc. , different outputs of your engine, or even your different driving environment. For example, a stop and go driver in traffic will have a shorter rotor life than one that drives mostly on an open highway. WILL MY ROTORS STAY COMPLETELY BLACK? When you first receive your order they will be completely black. After initial brakes-in procedure, where the pad and the rotor comes into contact, the black will wear off leaving the hub, edge, and inner vanes black. WHAT COATING DO THE ROTORS HAVE? The drilled/slotted brake rotors can with silver, black, or gold zinc plating. The plain non drilled or slotted blank rotors do not come with zinc plating. The zinc coating on the brake surface will rub off after the initial bed-in period. The braking surface, the cross drills holes and/or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for a long extended period. Please be aware that zinc plating aide against rust but not prevent rust indefinitely. The report must include information and/or test results that prove the rotor(s) to be at warped. US Direct Parts is not responsible and will not pay for any outside cost such as storage, mechanical work or diagnostic testing. All brake pads, regardless of type or brand will have a chance to make noise. Brake pad noise does not mean the pads are bad or defective. There are many variables that can affect brake noise. Actual packaging may vary from image. ARE THE ROTORS AND PADS IMAGES THE ACTUAL ITEMS I WILL RECEIVE? Actual items can vary due to fitment specification. DO NOT confirm your fitment base on images. Please check fitment details for things such as trim, sub-models, production date, etc thoroughly to ensure proper fitment. HOW DO WE REACH YOU IF WE HAVE FURTHER QUESTIONS? But we also get customers who prefer to talk to a live professional that can help you get the right part right away. The item “FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L” is in sale since Monday, March 5, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “usdirectparts” and is located in Garden Grove, California. This item can be shipped worldwide.
  • Brand: HartBrakes
  • Pad Material: Ceramic Low Dust
  • Manufacturer Part Number: USDP-BLK-FOR057-C-EDS-301
  • Brake Disc Style: Drilled
  • Rotor Style: Drilled
  • Fitment Type: Direct Replacement
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • California Prop 65 Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov
  • ZINC: Black Zinc Plated
  • Brake Pad Compound: Ceramic Low Dust
  • Warranty Length: 1 Year Warranty
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above

FULL KIT BLACK HART DRILL/SLOT BRAKE ROTORS & PADS-Ford MUSTANG 05-10 V6-4.0L

Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300

Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300
Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300
Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300
Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300
Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300
Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300
Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300

Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300
Fitment based on U. Lexus GS300, GS400, GS430 [1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005]. Lexus IS300 [2001, 2002, 2003, 2004, 2005]. Lexus SC430 [2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010]. Front & Rear POWERSPORT Cross-Drilled & Slotted Brake Rotors. ACTUAL PRODUCT MAY VARY FROM PHOTO. I didn’t expect my order to be here right away after placing it. Prices are good, parts fit perfect. I’ll recommend it to everybody I’ll rate them six stars! Orders placed after 5 p. Were Here to Help. Customer Service is Available. Will this fit on my vehicle? What are the dimensions? All images shown are sample pictures. No modifications needed to install the brakes. What coating do the rotors have? Only our drilled/slotted brake rotors will come with zinc plating. The OE style non drilled or slotted rotors do not come with zinc plating. The zinc plating on the braking surface of the drilled/slotted rotors (area where the brake pads contact when you brake) will come off during braking. The braking surface, the cross drills holes and/or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. Zinc plating will help against rust but not prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? All images are for display purposes. Actual items can vary due to fitment specification. We advise you to never confirm your fitment base on images. Where is my item? The packaging I received does not look like the image online? Actual packaging may vary from image. All return item(s) must be unused and brand new in its original box. The report must include exact details, measurements, symptoms that prove the rotor or rotors to be warped along with any associated test results. Brake Labs is not responsible for any outside cost. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Here at Brake Labs we make it easy for consumers to meet their braking needs without any modifications to their factory system. Our goal is to provide the best braking power for any driving style and driving conditions. The item “Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300″ is in sale since Tuesday, July 17, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “brakelabs” and is located in La Habra, California. This item can be shipped worldwide.
  • Brand: PowerSport
  • Manufacturer Part Number: TOPBL-LEX017-C-EDS
  • Brake Disc Style: Drilled & Slotted
  • Fitment Type: Direct Replacement
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • California Prop 65 Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov
  • ZINC: Silver Zinc Plated
  • Warranty Length: 1 Year Warranty
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Images: Images are samples, actual product may vary.

Brake Rotors FULL KIT POWERSPORT DRILLED SLOTTED -Lexus GS300

Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS

Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS

Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS
Cadillac CTS 2008 Models with HD (J55) Brakes (345mm Front Disc and 339mm Rear Disc) (Excludes CTS-V Models) Cadillac CTS 2009 – 2013 V6 Models With J55 Brake Package and 339mm Rear Rotors (Excludes CTS-V Models) Cadillac CTS 2014 Coupe And Wagon Models With J55 Brake Package and 339mm Rear Rotors (Excludes CTS-V Models). The item “Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS” is in sale since Wednesday, February 22, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “brake_overstock” and is located in Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Brand: Callahan Brake Parts
  • Pad Material: Ceramic
  • Manufacturer Part Number: BO5445781273
  • Brake Disc Style: Drilled & Slotted
  • Rotor Style: Drilled
  • Fitment Type: Direct Replacement
  • Interchange Part Number: 15267103
  • Other Part Number: 08;2009;2010;2011;2012;2013;2014
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • Surface Finish: Zinc
  • UPC: NA
  • Front Rotor Size (inch): 13.58
  • Rear Rotor Size (inch): 13.35
  • Year Range: 08;09;10;11;12;13;14
  • Lug Count: 5
  • Front Rotor Weight (Lb p/rotor): 25.60
  • Rear Rotor Weight (Lb p/rotor): 19.90
  • Solid Or Vented Front Rotor: VENTED
  • Solid Or Vented Rear Rotor: VENTED
  • Images: Images Are Examples, Product (Pad Color) May Vary.

Font+Rear Drill Slot Brake Rotors And Ceramic Pads For 2008 2014 Cadillac CTS

FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086

FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086
FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086
FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086
FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086
FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086
FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086

FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086
2 FRONT + 2 REAR. 4 FRONT + 4 REAR. Lexus GX470 [2003, 2004, 2005, 2006, 2007, 2008, 2009]. Toyota 4RUNNER [2003, 2004, 2005, 2006, 2007, 2008, 2009] 17″ Factory Wheels & 338mm (13.31″) Diameter Front Brake Rotor. Hart brakes rotors are finished with black zinc plating which helps prevents rotors from rust, oxidation, and oxididation. Cross drilled holes help keep the rotors cooler by ventilating air through the product. Diamond slots improve the brakes system performance by wiping away the debris of used friction material. It also helps prevent the brakes pads from glazing and improves initial brakes response under wet conditions. Our rotors are finished with black zinc plating. Prevents rotors from rust, oxidation, and oxididation. Please be advised that when you first receive the rotors, they will be completely zinc plated. After the initial break-in procedure where the pads come in contact with the rotor, the zinc will wear off, leaving the hat and inner vane structure silver. LONGEST WEARING MOST ADVANCE MATERIAL AVAILABLE. 100% SCORCHED FOR EASY BED-IN. 100% SHIMMED TO ELIMINATE NOISE AND VIBRATION. POSITIVE MOLDED FOR EVEN WEAR CHARACTERISTICS. STABLE FRICTION PERFORMANCE ACROSS A WIDE TEMPERATURE RANGE. ARE THE PRODUCTS BRAND NEW? All of our US Direct Parts items are 100% brand new. DO YOU NEED ADDITIONAL INFORMATION ABOUT MY VEHICLE? At checkout, please include the year, make, and model. Also include additional information. Ex: engine size (liters), 2wd, 4wd, 4 cyl or V6, turbo or non-turbo, abs or non-abs, etc. ARE THERE ANY SPECIAL MODIFICATIONS NECESSARY TO INSTALL THESE ROTORS? All of our brakes rotors are Original Equipment Manufecturer (OEM) spec. HOW LONG CAN I EXPECT MY NEW brakes TO LAST ME? All of our brakes parts are designed with longevity in mind, but it will depend on many different factors such as the type of vehicle you are driving, type of driver you are aggressive driver, normal driver, etc. , different outputs of your engine, or even your different driving environment. For example, a stop and go driver in traffic will have a shorter rotor life than one that drives mostly on an open highway. WILL MY ROTORS STAY COMPLETELY BLACK? When you first receive your order they will be completely black. After initial brakes-in procedure, where the pad and the rotor comes into contact, the black will wear off leaving the hub, edge, and inner vanes black. WHAT COATING DO THE ROTORS HAVE? The drilled/slotted brake rotors can with silver, black, or gold zinc plating. The plain non drilled or slotted blank rotors do not come with zinc plating. The zinc coating on the brake surface will rub off after the initial bed-in period. The braking surface, the cross drills holes and/or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for a long extended period. Please be aware that zinc plating aide against rust but not prevent rust indefinitely. The report must include information and/or test results that prove the rotor(s) to be at warped. US Direct Parts is not responsible and will not pay for any outside cost such as storage, mechanical work or diagnostic testing. All brake pads, regardless of type or brand will have a chance to make noise. Brake pad noise does not mean the pads are bad or defective. There are many variables that can affect brake noise. Actual packaging may vary from image. ARE THE ROTORS AND PADS IMAGES THE ACTUAL ITEMS I WILL RECEIVE? Actual items can vary due to fitment specification. DO NOT confirm your fitment base on images. Please check fitment details for things such as trim, sub-models, production date, etc thoroughly to ensure proper fitment. HOW DO WE REACH YOU IF WE HAVE FURTHER QUESTIONS? But we also get customers who prefer to talk to a live professional that can help you get the right part right away. The item “FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086″ is in sale since Friday, December 28, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “usdirectparts” and is located in Garden Grove, California. This item can be shipped worldwide.
  • Brand: HartBrakes
  • Pad Material: Ceramic Low Dust
  • Manufacturer Part Number: USDP-BLK-LEX026-C-EDS-301
  • Brake Disc Style: Drilled
  • Rotor Style: Drilled
  • Fitment Type: Direct Replacement
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • California Prop 65 Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov
  • ZINC: Black Zinc Plated
  • Brake Pad Compound: Ceramic Low Dust
  • Warranty Length: 1 Year Warranty
  • Front Rotor Size (mm): 338
  • Rear Rotor Size (mm): 312
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above

FRONT+REAR KIT Black Hart DRILLED & SLOTTED Brake Rotors +Ceramic Pads C2086

Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD

Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD
Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD
Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD
Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD
Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD
Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD
Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD

Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD
Fitment based on U. BMW 525Xi [2006, 2007, 2008, 2009, 2010] AWD. BMW 528Xi, 528i XDRiVE [2006, 2007, 2008, 2009, 2010] AWD. BMW 530Xi [2006, 2007, 2008, 2009, 2010] AWD. BMW 535Xi, 535i XDRiVE [2006, 2007, 2008, 2009, 2010] AWD. Front & Rear POWERSPORT Cross-Drilled & Slotted Brake Rotors. Front & Rear POWERSPORT Ceramic Brake Pads. ACTUAL PRODUCT MAY VARY FROM PHOTO. I didn’t expect my order to be here right away after placing it. Prices are good, parts fit perfect. I’ll recommend it to everybody I’ll rate them six stars! Consistent Coefficient Of Friction Through Temperature Range. Consistent performance and reliablitly. Easy And Quick Bed-In. My new brake pads are outstanding. I can feel the difference on the bite with the new pads. Orders placed after 5 p. Were Here to Help. Customer Service is Available. Will this fit on my vehicle? What are the dimensions? All images shown are sample pictures. No modifications needed to install the brakes. What coating do the rotors have? Only our drilled/slotted brake rotors will come with zinc plating. The OE style non drilled or slotted rotors do not come with zinc plating. The zinc plating on the braking surface of the drilled/slotted rotors (area where the brake pads contact when you brake) will come off during braking. The braking surface, the cross drills holes and/or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. Zinc plating will help against rust but not prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? All images are for display purposes. Actual items can vary due to fitment specification. We advise you to never confirm your fitment base on images. Where is my item? The packaging I received does not look like the image online? Actual packaging may vary from image. All return item(s) must be unused and brand new in its original box. The report must include exact details, measurements, symptoms that prove the rotor or rotors to be warped along with any associated test results. Brake Labs is not responsible for any outside cost. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Here at Brake Labs we make it easy for consumers to meet their braking needs without any modifications to their factory system. Our goal is to provide the best braking power for any driving style and driving conditions. The item “Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD” is in sale since Saturday, August 18, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “brakelabs” and is located in La Habra, California. This item can be shipped worldwide.
  • Brand: PowerSport
  • Pad Material: Ceramic Low Dust
  • Manufacturer Part Number: TOPBL-BMW113-C-EDS-301
  • Brake Disc Style: Drilled & Slotted
  • Fitment Type: Direct Replacement
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • California Prop 65 Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov
  • ZINC: Silver Zinc Plated
  • Warranty Length: 1 Year Warranty
  • Brake Pad Compound: Ceramic Low Dust
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Images: Images are samples, actual product may vary.

Brake Rotors FULL KIT POWERSPORT DRILL/SLOT & PAD-BMW 525Xi 2006 2010 AWD