Tag Archives: caprice

Rear_Brake_Rotors_Black_Drill_Slot_For_1994_1996_Chevrolet_Caprice_Impala_01_tl

Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala

Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala
Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala
Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala
Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala
Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala
Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala

Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala
FITS THE FOLLOWING VEHICLE(S). Fitment based on U. Actual product may vary from photo. R1 Concepts eLINE Series Brake Rotors – YouTube. Rear Performance Brake rotors. 2 Rear R1 Concepts Black Drilled Slotted Brake Rotors. Approximately 15,000 reported car accidents occur each day. Stopping faster means stopping safer. Whether you’re taking your children to a dance recital or hitting the town with your friends, you need to be able to remain in complete control of your vehicle. Reliable and durable, eLINE Series Brake Rotors will get you to your destination safely no matter where you’re going. Better braking performance made affordable. ELINE Series Brake Rotors provide high-quality stopping power at a low and affordable cost. With our state-of-the-art technology, you don’t need to choose between performance and budget: it’s all there in a single package. Your brake rotors will last longer, cost you less, and ensure your vehicle’s safety for thousands of miles to come. Importance of changing your brake disc. Are your brakes wobbling? When you notice erratic behavior from your brakes, it nearly always means that your brakes need to be serviced immediately. A failure to properly maintain and replace your disk brake system will eventually cause your brake system to fail – and that could have disastrous results. Failing to change your brake pads or rotors as needed will also cause additional wear and damage to your car over time, which can be quite costly to repair. WHY UPGRADE TO eLINE SERIES VS. Zinc Plated for corrosion protection. All of our eLINE Series Brake Rotors, excluding our blank pattern rotors, come with a special zinc plating designed to protect from corrosion. Though some of this corrosion protection will inevitably wear off through use, the rest of the rotor will remain protected. This leads to better appearance, longer life, and overall improved maintenance and replacement costs. Our eLINE Series Brake Rotors are available in silver, black, and gold. Please be advised that when you first receive the rotors, they are completely covered with the black zinc coating. During the initial embedding process, the black zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -Rob_67. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! Shop R1 Concepts Brake Products. ELINE Series Brake Rotors. R1 Carbon GEOMET Series Brake Rotors. R1 Concepts Brake Pads. R1 Concepts Brake Sensors. R1 Concepts Brake Hardware. R1 Concepts Brake Calipers. R1 Concepts Brake Drum. G2 Caliper Paint Kit. What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Other brake product FAQS. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Rear, Left, Right
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: RBC.62051.01
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Black Zinc
  • Interchange Part Number: 1994 1995 1996
  • Images: Images are samples, actual product may vary
  • Lug/Bolt Circle: 8×165.1
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Rear Rotor Size (mm): 353
  • Vented Or Solid Rear Rotor: Vented
  • Warranty Length: 1 Year Warranty
  • ZINC: Black Zinc

Rear Brake Rotors Black Drill Slot For 1994-1996 Chevrolet Caprice, Impala
Front_Rear_Drill_Slot_Brake_Rotors_And_Ceramic_Pads_For_Chevy_Caprice_Impala_01_fmcl

Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala

Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala

Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Fits: Chevy Caprice 1994 – 1996 – Models with rear disc brakes only Fits: Fits: Chevy Impala SS 1994 – 1996. The BrakeOverstock team is dedicated to the service of our customers. We strive to make it as easy as possible for customer ordering. Hardware + Sensors included if specified. BrakeOverstock is known to offer high quality parts that are made based on factory industry standard specifications. Exact fitment with value. Quality you can trust. Shown in our test video located here at: YouTube/Brakoverstock. Brake hardware always included if specified. Displayed photo is not actual product. Always check your vehicle compatibility. Made to meet/exceed OEM factory standards. Original equipment (OEM) fitment for easy installation. Each rotor is machined to strict tolerances and dynamically balanced. Our premium rotors are also built to match OE dimensions for easy bolt on installation. No Rotor warping & rotor cracking. Cross-drilled Brakeoverstock smoothing tolerances prevent rotor warping/future machining. Our performance rotors are cross-drilled to keep your rotors cool & to help prevent rotor warping. Airflows within the rotor for faster convection of heat transfer. Our premium rotors are built to OE dimensions for easy bolt on installation. Factory thickness and oem specification rotors, meaning no warping / cracking. OEM vane count, no reduced vane count. Greater stops means less brake pedal pressing. +Mold technology formula with 20% more stopping power. BrakeOverstock brakes are thermal scorched for fast break-in. They are also made with positive mold technology to avoid brake squeal and provide consistent stopping power all day. Noise free ceramic brake pads features dual layered rubber shims that allows more sound absorption during normal every day braking acceleration and deceleration. Brake sensors are available if specified. Brake Sensors are available if specified. Dual shims protection for the pad & caliper. Parts are made to fit just as OEM. Better Pads for better performance of brake rotors and brake calipers. Each BrakeOverstock brake pad is formulated to withstand up to 20% more stopping power per axle wheel compared to most leading auto part brands. Brakeoverstock includes these quality pads with our kits. Compared to others pads with short life-span. Damaging effects, loud noise. Next pad repair requires new rotors/calipers. Brake sensors are available is applicable. This product can expose you to chemicals including the element Chromium (hexavalent compounds), Antimony oxide (Antimony trioxide), and Nickel (Metallic), which are known to the State of California to cause cancer, and Chromium (hexavalent compounds) which is known to the State of California to cause birth defects or other reproductive harm. In Stock Replacement Parts. The Brakeoverstock customer service representatives are available Monday until Friday from 8:30 to 5:30 CST and Saturday 9:30 to 4:30 CST. All defective items will be inspected and tested by our RGA Department. If you have received a damaged or defective item, please report the problem to our customer service team. Please inspect your product on receipt. Replacement parts will be used to honor the claim at our discretion. Please contact our offices to request an RGA number. We request that you have the RGA number clearly written on the package, otherwise the return cannot be processed. More than 20 years experience. The experts at BrakeOverstock are car enthusiasts with over 20 years of experience in the automotive aftermarket. We stock over 10,000 quality parts in our midwest warehouse. BrakeOverstock sells premium brake parts including quiet, low dust ceramic pads, premium OEM rotors, performance drilled/slotted rotors, hub rotors, hub bearings, color calipers and OEM calipers. This way, you can receive and install your parts over the weekend. 100% Safe and Secure Online Shopping. We guarantee perfect fitment every time. If you order the wrong part. The team at BrakeOverstock is dedicated to your complete satisfaction. If you have any concerns, please give us a chance to address the issue. We are available Monday through Friday from 8:30AM CST to 5:30PM CST. Saturday from 9:30AM CST to 4:30PM CST. Our knowledgeable customer service technicians are always ready to assist you. The item “Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala” is in sale since Friday, December 20, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “brake_overstock” and is located in Orland Park, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Brand: Brake Overstock
  • Manufacturer Part Number: BO6570040339
  • Placement on Vehicle: Front
  • Pad Material: Ceramic
  • Fitment Type: Direct Replacement
  • Warranty: 1 Year
  • Interchange Part Number: Impala
  • Surface Finish: Silver Zinc Plating
  • Custom Bundle: Yes
  • UPC: NA
  • Front Rotor Size (inch): 11.86
  • Rear Rotor Size (inch): 11.61
  • Year Range: 1994;1995;1996
  • Lug Count: 5
  • Brake Pad Compound: Ceramic
  • Front Rotor Weight (Lb p/rotor): 26.24
  • Rear Rotor Weight (Lb p/rotor): 12.79
  • Solid Or Vented Front Rotor: VENTED
  • Solid Or Vented Rear Rotor: VENTED
  • Images: Images Are Examples, Product (Pad Color) May Vary.
  • Front Lug / Bolt Circle: 5 x 127mm
  • Rear Lug / Bolt Circle: 5 x 127mm

Front + Rear Drill Slot Brake Rotors And Ceramic Pads For Chevy Caprice Impala
Front_Rotors_For_Buick_Roadmaster_Chevy_Caprice_Impala_SS_Customer_Cruiser_01_dkex

Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser

Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser

Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
FITS THE FOLLOWING VEHICLES. Fits: Buick Roadmaster 1991 – 1996 Fits: Cadillac Fleetwood 1991 – 1996 Rear Wheel Drive Models There are 2 different brake packages for this vehicle. These rotors will fit models with front rotors 1 thick or less. These will NOT fit if your vehicle has rotors that are 1.25 thick. Please measure before purchasing Fits: Chevy Caprice 1991 1996 Fits: Chevy Impala SS 1994 – 1996 Fits: Oldsmobile Custom Cruiser 1991 – 1992. JOIN THOUSANDS OF OUR HIGHLY SATISFIED CUSTOMERS. Please read all fitment information provided above to verify your vehicle has the correct parts. All rotors are precision machined for exact OEM In-stock replacement. Please dont forget to read proper fitment information listed in the check vehicle fits section listed above for your vehicles correct parts. Kinetic rotors are designed for optimum rotor cooling and durability with one cooling hole per vane. This also provides superior strength to avoid cracking. This insures that the hottest part of the rotor gets cooled. The fact is that the drill holes greatly improve convection heat transfer and the result is more brake pad bite. LEADING IN VALUE AND PERFORMANCE. Cross-drilled rotors keep the brakes up to 150 degress cooler to prevent rotor warping. Therefore your pads last even longer and your rotors still look good. ACTUAL SILVER ZINC PLATING. ELECTRO-CHEMICAL ZINC PLATING IS THE BEST WAY TO PROTECT METAL FROM RUST. SOME BRANDS USE A LIGHT OIL / GREASE FILM COATING OVER THE ROTORS. LONG LASTING HIGH QUALITY ROTORS. Cross-drilled rotors can improve stopping power up to 35% over stock rotors as reported in SAE Technical Paper 2006-01-0691. The effect of rotors cross-drilled brake performance. That is why Corvette, Porsche. Mercedes and BMW vehicles come with factory direct with drilled and slotted rotors, i. Not dimpled or slotted. High rotor temperature can cause heat spots to form in the rotor, and this causes pulsating brakes. Cross-drilled rotors keep the brakes up to 150 degrees cooler to prevent rotor warping. OPTIMUM COOLING / DURABILITY. WARNING:This product can expose you to chemicals including Chromium (hexavalent compounds) and Nickel (Metallic), which are known to the State of California to cause cancer, and Chromium (hexavalent compounds) which is known to the State of California to cause birth defects or other reproductive harm. ROUNDED SLOTS ARE BETTER! Every slot is chamfered for a smooth linear transition at the edge. Electro-chemical plating is the best way to protect metal from rust. Some brands use painted rotors that peel or discolor when the rotors get hot. Zinc Plating Does Not Apply To Hub and Rotor Assemblies! Please see item specifics above for details on surface finish. DRILL HOLES PREVENT ROTOR WARPING. Drill holes allow air to flow over and through the vanes to improve convection heat transfer and keep the rotors up to 150 degrees cooler. Our premium rotors are designed with several cooling vanes that keep the rotor from long term negative effects such as warping. Brakemotive is one of the largest brake supplier in North America, with over 250,000 satisfied customers. We only sell premium performance brake kits to assure the very best quality. Because of our large volume, we can offer steep price discounts. In most cases, the delivered price of our perfomance rotor and ceramic brake pad kits is at or below the cost of equivalent plain rotors and brake pads from your neighborhood retail store. Experienced engineering team uses advanced CAD (computer aided design) software to configure the rotor drill holes and slots for best optimum braking. We machine the rotors with state-of-the-art CNC (computer numerical controlled) machines in our mid-west plant with strict quality control. We guarantee a perfect fit to your vehicle, but please check the part fitments information in this listing before your order. Brakemotive products must be installed per the manufacturers instructions. The Brakemotive team members are available to answer your questions Monday through Friday from 8:30AM CST to 6:00PM CST and Saturday from 9:30AM CST to 4:30PM CST. If you can’t find the parts for your vehicle, just give us a call. At Brakemotive replacement parts are always in stock. Brakemotive is one of the largest brake suppliers in North America, with over 250,000 satisfied customers. Not to worry, your order will still get to you quickly and efficiently! Additional charges may be incurred for international callers, please contact your provider for more details. Times vary by country. ALL PARTS MADE TO U. “INTERANTIONAL BUYERS are NOT ELIGBLE for the caliper core return program”. How many brake pads are in a “set”? On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. Is the brake rotor picture the same as the rotor I will receive? The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. Are any modifications nessassary to make these rotors fit my vehicle? No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation. Metallic Vs Ceramic Brake Pads? Ceramic pads are quieter, however, metallic pads are more appropriate from constant tough braking like trucking, hauling, intense highway driving or racing. Will I get Tracking Information? Are the drilled holes and slots directional? Yes, the rotors are machined based on their orientation on the vehicle. Driver’s side (left) and passenger’s side(right) have unique patterns so the slot trails toward the back of the vehicle. What causes rotor warping? Rotor warping is cause from lack of maintenance to a vehicle rotors brakes calipers, and other braking components. Do I have solid rotors or vented rotors? Solid rotors usually contain a single thin solid metal braking surface. Vented rotors have vents/vanes between two solid rotor surfaces. The item “Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser” is in sale since Thursday, January 18, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “brakemotive76″ and is located in Chicago, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Brand: Brakemotive
  • Manufacturer Part Number: BM8088535167
  • Placement on Vehicle: Front
  • Rotor Style: Drilled
  • Fitment Type: Direct Replacement
  • Warranty: 10 Year
  • Interchange Part Number: Centric: 120.62035
  • Surface Finish: Natural Finish (Hub Rotor Assembly)
  • Front Rotor Size (inch): 11.86
  • Front Rotor Weight (Lb p/rotor): 26.24
  • Images: Images Are Examples, Product May Vary.
  • Lug / Bolt Circle: 5 x 127mm
  • Lug Count: 5
  • Other Part Number: brake discs
  • Solid Or Vented Front Rotor: VENTED
  • Solid Or Vented Rotors: VENTED
  • Year Range: 91;92;93;94;95;96

Front Rotors For Buick Roadmaster Chevy Caprice Impala SS Customer Cruiser
CHE084SD_94_96_Impala_Caprice_Performance_Rotors_Front_Rear_Double_Drill_Diamond_01_sd

CHE084SD 94-96 Impala Caprice Performance Rotors Front/Rear Double Drill Diamond

CHE084SD 94-96 Impala Caprice Performance Rotors Front/Rear Double Drill Diamond

CHE084SD 94-96 Impala Caprice Performance Rotors Front/Rear Double Drill Diamond
Introducing the Evolution in braking. Double Cross-Drilled and Arrow-Slots designed made to out perform other designs in the market. A much stronger and reliable breed of brake disc. Is your vehicle ready to Evolve? Front & Rear Pairs of Double Drilled and Arrow Slots Quick Stop Pro Performance Rotors. Front: 11.86″ diameter with Wheel Studs QSP5577 Rear: 11.61″ diameter QSP55017. [Please Verify Make/Model/Year and Spec]. Quick Stop Pro’s Brake Rotors are. OEM/Stock size, which is a direct replacement to your brake system. No need to resurface or modify. Double drilled and Arrow slotted designed for optimal performance under various braking condition. Well extend the life of your brake pads. Accurately measured and calculated for design with precision. Balanced using top of the line technology. Equipped with black rust protection over all vital areas of the rotor. (areas at risk of rusting). Overall, the next best thing to big-brake kit. Advance technologies and precision calls for great steel casting and pro balancing. Quick Stop Pro is proud to bring you the best. Quick Stop Pro is a company dedicated on Quality product and service. We offer only the best when it comes to performance brake disc/rotor. Notice that quantity of drills and slots vary on every make and model. It is to insure our superb performance with safety in mind. Customer will be contact if there is any delay. Quick Stop Pro is dedicated to service and satisfaction. Please include make/model/year and any other information that we might need. The item “CHE084SD 94-96 Impala Caprice Performance Rotors Front/Rear Double Drill Diamond” is in sale since Friday, April 17, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “quickstoppro” and is located in Riverside, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam, China, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Uruguay.
  • Warranty: 90 Day
  • Manufacturer Part Number: CHE084SD
  • Brand: Quick Sto Pro
  • OE Spec or Performance/Custom: Performance/Custom
  • Brake Disc Style: Drilled & Slotted

CHE084SD 94-96 Impala Caprice Performance Rotors Front/Rear Double Drill Diamond

Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice

Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice

Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice
FITS THE FOLLOWING VEHICLES. Chevy Caprice 1994 – 1996 – Models with rear disc brakes only Chevy Impala SS 1994 – 1996. On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation. Yes, the rotors are machined based on their orientation on the vehicle. Driver’s side (left) and passenger’s side(right) have unique patterns so the slot trails toward the back of the vehicle. The item “Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice” is in sale since Monday, April 16, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “brakemotive76″ and is located in Chicago, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.
  • Brand: Brakemotive
  • Manufacturer Part Number: BM8339958581
  • Brake Disc Style: Drilled & Slotted
  • Rotor Style: Drilled
  • Fitment Type: Direct Replacement
  • Interchange Part Number: 120.62035;5577;120.62053;55017
  • Placement on Vehicle: Front
  • Warranty: 6 Month
  • Year Range: 94;95;96
  • Front Rotor Size (inch): 11.86
  • Rear Rotor Size (inch): 11.61
  • Lug Count: 5
  • Solid Or Vented Front Rotor: VENTED
  • Solid Or Vented Rear Rotor: VENTED
  • Front Rotor Weight (Lb p/rotor): 26.24
  • Rear Rotor Weight (Lb p/rotor): 12.79

Front & Rear Drilled And Slotted Performance Brake Rotors Chevy Impala Caprice

Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala

Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala

Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala
FITS THE FOLLOWING VEHICLES. Chevy Caprice 1994 – 1996 – Models with rear disc brakes only Chevy Impala SS 1994 – 1996. On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation. Yes, the rotors are machined based on their orientation on the vehicle. Driver’s side (left) and passenger’s side(right) have unique patterns so the slot trails toward the back of the vehicle. The item “Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala” is in sale since Thursday, September 26, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “brakemotive76″ and is located in Chicago, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.
  • Brand: Brakemotive
  • Manufacturer Part Number: BM3183867029
  • Brake Disc Style: Drilled & Slotted
  • Fitment Type: Direct Replacement
  • Interchange Part Number: 120.62035;5577;120.62053;55017
  • Placement on Vehicle: Front
  • Warranty: 6 Month
  • Year Range: 1994;1995;1996
  • Brake Pad Compound: Ceramic Low Dust Formula
  • Front Rotor Size (inch): 11.86
  • Rear Rotor Size (inch): 11.61
  • Lug Count: 5
  • Solid Or Vented Front Rotor: VENTED
  • Solid Or Vented Rear Rotor: VENTED
  • Front Rotor Weight (Lb p/rotor): 26.24
  • Rear Rotor Weight (Lb p/rotor): 12.79

Front + Rear Drilled Slotted Brake Rotors And Ceramic Pads Chevy Caprice Impala