Tag Archives: sensor

F_R_BRAKENETIC_SPORT_Drill_Slot_Brake_Rotors_Ceramic_Pads_Sensor_BSK100912_01_uhy

F&R BRAKENETIC SPORT Drill Slot Brake Rotors + Ceramic Pads + Sensor BSK100912

F&R BRAKENETIC SPORT Drill Slot Brake Rotors + Ceramic Pads + Sensor BSK100912
F&R BRAKENETIC SPORT Drill Slot Brake Rotors + Ceramic Pads + Sensor BSK100912

F&R BRAKENETIC SPORT Drill Slot Brake Rotors + Ceramic Pads + Sensor BSK100912
NOTE: Image is a general representation, actual product may differ. Hardware kit included where applicable. ITEM INCLUDE(S): 2 Front Brakenetic Sport Cross Drilled and Slotted Brake Rotors 2 Rear Brakenetic Sport Cross Drilled and Slotted Brake Rotors. 1 Front Set of Ceramic Brake Pads 1 Rear Set of Ceramic Brake Pads 1 Front Sensor. Posi Quiet brake friction features either precision cut or shaved backing plates and mechanically attached shims; these small details ensure proper fitment in the caliper and virtually eliminate noise associated with pad vibration. Posi Quiet brake pad sets come complete with application specific hardware including stainless abutment clips, rubber slide pin boots and retaining clips. Posi Quiet fiction formulas create less dust, thus keeping wheels cleaner. Stable friction performance across wide temperature range. Application specific OE-style noise shims reduce or eliminate noise caused by pad vibration. Replacement hardware kits help eliminate noise caused by old and damaged hardware. 100% positive molded for uniform friction material density. Scorched to raise initial cold effectiveness and faster break-in. Customer will be responsible for returning detective rotors for inspection. All authorized return merchandise must be in brand new condition. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “brakenetic” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Brakenetic
  • Placement on Vehicle: Front, Left, Rear, Right
  • Manufacturer Part Number: BSK100912
  • Fitment Type: Direct Replacement
  • Manufacturer Warranty: 1 Year
  • Warranty: 1 Year
  • Surface Finish: Zinc Plated
  • Brake Disc Style: Drilled & Slotted

F&R BRAKENETIC SPORT Drill Slot Brake Rotors + Ceramic Pads + Sensor BSK100912
Full_Kit_Drill_Slot_Brake_Rotors_Semi_Met_Pads_Hardware_Sensor_BHCC_32015_53_01_jt

Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53

Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53
Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53
Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53
Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53
Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53
Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53
Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53

Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53
Hart Brake Series – THE POWER YOU WANT, THE PRODUCT YOU NEED. What are the benefits of HartBrake Kits? All in 1 Brake Kit. HartBrakes Cross-Drilled and Slotted Brake Rotors combine with our low dust and low noise, providing the maximum benefits in stopping power, durability, and performance. This brake kit is perfect for the daily driver looking for more braking power. Performance brakes are not only made for the race tracks or for race cars. Stopping quicker on the road may save you from an accident. Which kit should I go with? We make it easy by putting the rotors with the recommended kit to make it a perfect brake kit. The rotor is coated with silver zinc to maximize the life of the rotor and protects against rust. What makes HartBrakes special? Tested and Proven Performance. Perfect Fit, Form, and Function. When developing each of our products, we made sure they are all tested, providing the right amount of performance for the daily driver. All of our products are the same OE (Original Equipment) specifications. No modifications are required. We not only strive to give out the best products, but also the best customer service possible. We’re here to help with any questions you may have. If it’s a product or installation question, our brake specialists are ready to help. Hart brakes strive to deliver quality brakes that perform in any driving conditions with a touch of color. All of our brake parts are intended for street performance. Helping you stop shorter distances, low on noise, low on dust, and giving you consistent performance at every stop making it ideal for everyday use. Payments that are received after 5:00 p. Send us a message! ARE THE PRODUCTS BRAND NEW? All of our US Direct Parts items are 100% brand new. DO YOU NEED ADDITIONAL INFORMATION ABOUT MY VEHICLE? At checkout, please include the year, make, and model. Also include additional information. Ex: engine size (liters), 2wd, 4wd, 4 cyl or V6, turbo or non-turbo, abs or non-abs, etc. ARE THERE ANY SPECIAL MODIFICATIONS NECESSARY TO INSTALL THESE ROTORS? HOW LONG CAN I EXPECT MY NEW brakes TO LAST ME? All of our brake parts are designed with longevity in mind, but it will depend on many different factors such as the type of vehicle you are driving, type of driver you are aggressive driver, normal driver, etc. , different outputs of your engine, or even your different driving environment. For example, a stop and go driver in traffic will have a shorter rotor life than one that drives mostly on an open highway. WILL MY ROTORS STAY COMPLETELY BLACK? When you first receive your order they will be completely black. After initial brakes-in procedure, where the pad and the rotor comes into contact, the black will wear off leaving the hub, edge, and inner vanes black. HOW DO WE REACH YOU IF WE HAVE FURTHER QUESTIONS? One of our professional representatives can assist you with any question or concerns that you may have. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “usdirectparts” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Hart Brakes
  • Placement on Vehicle: Front, Rear
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: BHCC.32015.53
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Black Zinc Plated
  • Brake Pad Compound: Semi Metallic
  • Images: Images are samples, actual product may vary.
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Warranty Length: 1 Year Warranty
  • ZINC: Black Zinc Plated

Full Kit Drill Slot Brake Rotors, Semi-Met Pads, Hardware + Sensor BHCC. 32015.53
Rear_Brake_Rotors_Drill_Slot_Black_Oep_Pads_Hardware_and_Sensor_1BC_20009_57_01_hsb

Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57

Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57
Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57
Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57
Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57
Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57
Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57

Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57
2 eLine Black Drilled Slotted Brake Rotors. 4 Optimum OEp Brake pads. Please be advised that when you first receive the rotors, they are completely covered with the silver zinc coating. During the initial embedding process, the silver zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -TUNER_BAE. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! Shop R1 Concepts Brake Products. ELINE Series Brake Rotors. R1 Carbon GEOMET Series Brake Rotors. R1 Concepts Brake Pads. R1 Concepts Brake Sensors. R1 Concepts Brake Hardware. R1 Concepts Brake Calipers. R1 Concepts Brake Drum. G2 Caliper Paint Kit. What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Other brake product FAQS. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Bermuda, Bolivia, Ecuador, Egypt, Cayman Islands, Nicaragua, Peru, Paraguay, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Rear
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: 1BC.20009.57
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Black Zinc Plated
  • Interchange Part Number: 2017 2018 2019
  • ZINC: Black Zinc Plated
  • Brake Pad Compound: OE Formulation
  • Warranty Length: 1 Year Warranty
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Images: Images are samples, actual product may vary.

Rear Brake Rotors Drill Slot Black+Oep Pads, Hardware, and Sensor 1BC. 20009.57
Front_Kit_Brake_Rotors_Drill_Slot_Ceramic_Pads_Sensor_For_2003_2009_E320_E350_01_nhnu

Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350

Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350

Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
FITS THE FOLLOWING VEHICLE(S). R1 Concepts eLINE Series Brake Rotors – YouTube. Package Includes 2 Performance Brake Rotors and 4 Ceramic Brake Pads. TAKING BRAKES TO HIGHER STANDARDS. GREATER POWER AND STABILITY. ELINE SERIES – CROSS-DRILLED AND SLOTTED. The eLINE Series rotor is manufactured with G3000 iron grade for greater braking power and stability. Available in OEM Replacement, Cross-Drilled, Diamond Slotted, and Cross-Drilled & Diamond Slotted. Looks great when installed and I definitely feel the braking difference. I’m loving the look… Gives the car a aggressive look overall compared to stock. WHY UPGRADE TO eLINE VS. INCLUDES SHIMS TO REDUCE BRAKE NOISE. FOR ANY VEHICLE THAT NEEDS THAT EXTRA BRAKE BITE! Provides long lasting braking power without having the squeal of an actual race pad. Works great on any vehicle that needs that extra brake bite. It doesn’t matter if it is quick stops in traffic or that spirited drive down your favorite backroad. They work great and the price was great. COMES COMPLETE FOR EACH AXLE AND READY TO INSTALL. If you have a brake light warning indicator on your dash, it’s time to change out your brake sensors. They are located near the brake pads and are meant for one time use only when triggered. Replace them with R1 Concepts Brake Wear Sensors and get rid of that brake light indicator. R1 CONCEPTS BRAKE WEAR SENSORS. R1 Concepts Brake Wear Sensors are designed and produced to have the same for, fit, and function as the original equipment part enabling easy installation and ensuring proper fit. Made of quality materials ensures durability and resistance to extreme temperatures. Manufactured with Highly Conductive Electrodes to accurately monitor pad wear level. Quality tested to ensure long-lasting performance. Comes complete for each axle, ready to install, no modifications required. YOUR SATISFACTION IS OUR MAIN PRIORITY. We want to reassure you fitment, excellent quality, and machine with precision. Please be sure to check vehicle application above to see if these parts will fit your car. Your Satisfaction is Our Main Priority. Item(s) being return must be in brand new condition as it originally came with the original boxes, hardware, manuals, accessories, and etc. No Code, No Hassle! What conditions are these items in? All our items are 100% brand new. How long does your rotors last? The life of the rotors is based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of rotors, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? ELINE Series brake rotors will come in silver zinc. Where the pads in contact with the rotor, the silver zinc will eventually wear off after the initial break-in procedure, leaving the hat and inner vane structure silver. This is normal and unavoided. America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Fax : Aim / Skype / Twitter / Yahoo : r1concepts. Machined in the U. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Front
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: FEC.35153.02
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Silver Zinc Plated
  • Interchange Part Number: 2003 2004 2005 2006 2007 2008 2009
  • ZINC: Silver Zinc Plated
  • Brake Pad Compound: Ceramic
  • Warranty Length: 1 Year Warranty
  • Front Rotor Size (mm): 295
  • Vented Or Solid Front Rotor: Vented
  • Lug/Bolt Circle: 5×112
  • Front Rotor Thickness (mm): 28
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Images: Images are samples, actual product may vary.

Front Kit Brake Rotors Drill Slot Ceramic Pads & Sensor For 2003-2009 E320, E350
Rear_Brake_Rotors_Drill_Slot_Ceramic_Pads_Hardware_Kit_and_Sensor_1PC_74004_52_01_aiv

Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52

Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52
Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52
Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52
Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52
Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52
Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52

Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52
R1 Carbon GEOMET Series Brake Rotors & R1 Ceramic Series Brake Pads – YouTube. FITS THE FOLLOWING VEHICLE(S). Fitment based on U. Actual product may vary from photo. 2 Rear R1 Carbon Series Cross-Drilled & Diamond Slotted Brake Rotors. Rear R1 Ceramic Series Brake Pads + Hardware Kit + Sensor Wire. Performance and Reliability you can count on. Aimed at high-performance driving, these rotors are designed not just for everyday use but for street performance, track, off-roading, and towing/hauling. When you need the best performance, the R1 Carbon GEOMET® Series will provide effective and quiet stopping power. Drilled and Diamond Slotted. Strength, Stability, Durability, and Performance. Our high carbon castings have been specially engineered to enhance noise dampening characteristics, all while providing the best in strength, stability, durability, and performance. Increased Carbon, Molybdenum, and Chromium makes it perfect for use with any vehicles, driving styles, and conditions. Engineered for only the best performance and durability, the R1 Carbon GEOMET® Series boasts a very long lasting superior corrosion protection through its special GEOMET® Finish. Not only does this specialty finish protect each brake rotor, but it also drastically reduces installation time. Our rotors have been engineered to match OEM technology to give equal or improved braking performance over OEM rotors. Once they have been constructed, each of our cores is dipped in a special formula, which is designed to create a smoother finish and improve air flow throughout the rotor. Our brake rotors include a special OE split-core technology, which dissipates heat evenly and faster. Split vane casting also makes the rotor stronger. Together, all this combined offers a consistent, high-performance braking experience. Once constructed, our brake rotors are then fine-turned to bring them to precise and exacting specifications. We offer brake rotors that have been machined to the tightest tolerances, resulting in increased contact between the brake pads and rotors, and reducing initial break-in time. Please be advised that when you first receive the rotors, they are completely covered with the GEOMET® coating. During the initial embedding process, the GEOMET® coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. Includes Shims to Reduce Brake Noise. For Any Vehicle that Needs that Extra Brake Bite! R1 CERAMIC SERIES BRAKE PADS. Provides long lasting braking power without having the squeal of an actual race pad. Works great on any vehicle that needs that extra brake bite. It doesn’t matter if it is quick stops in traffic or that spirited drive down your favorite backroad. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -Rob_67. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Fax : Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Rear
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: 1PC.74004.52
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Geomet Coating
  • Interchange Part Number: 2011 2012 2013 2014 2015 2016 2017 2018
  • ZINC: Geomet Coating
  • Brake Pad Compound: Ceramic
  • Warranty Length: 1 Year Warranty
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Images: Images are samples, actual product may vary.

Rear Brake Rotors Drill Slot + Ceramic Pads, Hardware Kit, and Sensor 1PC. 74004.52
Front_Brake_Rotors_Drill_Slot_Ceramic_Pads_Hardware_Kit_Sensor_1PC_20003_52_01_cguf

Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52

Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52
Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52
Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52
Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52
Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52
Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52

Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52
R1 Carbon GEOMET Series Brake Rotors & R1 Ceramic Series Brake Pads – YouTube. FITS THE FOLLOWING VEHICLE(S). Fitment based on U. Actual product may vary from photo. 2 Front R1 Carbon Series Cross-Drilled & Diamond Slotted Brake Rotors. Front R1 Ceramic Series Brake Pads + Hardware Kit + Sensor Wire. Performance and Reliability you can count on. Aimed at high-performance driving, these rotors are designed not just for everyday use but for street performance, track, off-roading, and towing/hauling. When you need the best performance, the R1 Carbon GEOMET® Series will provide effective and quiet stopping power. Drilled and Diamond Slotted. Strength, Stability, Durability, and Performance. Our high carbon castings have been specially engineered to enhance noise dampening characteristics, all while providing the best in strength, stability, durability, and performance. Increased Carbon, Molybdenum, and Chromium makes it perfect for use with any vehicles, driving styles, and conditions. Engineered for only the best performance and durability, the R1 Carbon GEOMET® Series boasts a very long lasting superior corrosion protection through its special GEOMET® Finish. Not only does this specialty finish protect each brake rotor, but it also drastically reduces installation time. Our rotors have been engineered to match OEM technology to give equal or improved braking performance over OEM rotors. Once they have been constructed, each of our cores is dipped in a special formula, which is designed to create a smoother finish and improve air flow throughout the rotor. Our brake rotors include a special OE split-core technology, which dissipates heat evenly and faster. Split vane casting also makes the rotor stronger. Together, all this combined offers a consistent, high-performance braking experience. Once constructed, our brake rotors are then fine-turned to bring them to precise and exacting specifications. We offer brake rotors that have been machined to the tightest tolerances, resulting in increased contact between the brake pads and rotors, and reducing initial break-in time. Please be advised that when you first receive the rotors, they are completely covered with the GEOMET® coating. During the initial embedding process, the GEOMET® coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. Includes Shims to Reduce Brake Noise. For Any Vehicle that Needs that Extra Brake Bite! R1 CERAMIC SERIES BRAKE PADS. Provides long lasting braking power without having the squeal of an actual race pad. Works great on any vehicle that needs that extra brake bite. It doesn’t matter if it is quick stops in traffic or that spirited drive down your favorite backroad. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -Rob_67. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Fax : Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Front
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: 1PC.20003.52
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Geomet Coating
  • Interchange Part Number: 2010 2011 2012 2013 2014 2015
  • ZINC: Geomet Coating
  • Brake Pad Compound: Ceramic
  • Warranty Length: 1 Year Warranty
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Images: Images are samples, actual product may vary.

Front Brake Rotors Drill Slot + Ceramic Pads + Hardware Kit+ Sensor 1PC. 20003.52
Rear_Brake_Rotors_Drill_Slot_Ceramic_Pads_Sensor_For_2011_2014_Mini_Cooper_01_dfcs

Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper

Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper

Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
R1 Concepts eLINE Series Brake Rotors – YouTube. FITS THE FOLLOWING VEHICLE(S). Fitment based on U. Actual product may vary from photo. 2 Rear Black eLine Series Drilled and Slotted Brake Rotors. Rear R1 Ceramic Series Brake Pads. Approximately 15,000 reported car accidents occur each day. Stopping faster means stopping safer. Whether you’re taking your children to a dance recital or hitting the town with your friends, you need to be able to remain in complete control of your vehicle. Reliable and durable, eLINE Series Brake Rotors will get you to your destination safely no matter where you’re going. Better braking performance made affordable. ELINE Series Brake Rotors provide high-quality stopping power at a low and affordable cost. With our state-of-the-art technology, you don’t need to choose between performance and budget: it’s all there in a single package. Your brake rotors will last longer, cost you less, and ensure your vehicle’s safety for thousands of miles to come. Importance of changing your brake disc. Are your brakes wobbling? When you notice erratic behavior from your brakes, it nearly always means that your brakes need to be serviced immediately. A failure to properly maintain and replace your disk brake system will eventually cause your brake system to fail – and that could have disastrous results. Failing to change your brake pads or rotors as needed will also cause additional wear and damage to your car over time, which can be quite costly to repair. WHY UPGRADE TO eLINE SERIES VS. Zinc Plated for corrosion protection. All of our eLINE Series Brake Rotors, excluding our blank pattern rotors, come with a special zinc plating designed to protect from corrosion. Though some of this corrosion protection will inevitably wear off through use, the rest of the rotor will remain protected. This leads to better appearance, longer life, and overall improved maintenance and replacement costs. Our eLINE Series Brake Rotors are available in silver, black, and gold. Please be advised that when you first receive the rotors, they are completely covered with the black zinc coating. During the initial embedding process, the black zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. Includes Shims to Reduce Brake Noise. For Any Vehicle that Needs that Extra Brake Bite! R1 CERAMIC SERIES BRAKE PADS. Provides long lasting braking power without having the squeal of an actual race pad. Works great on any vehicle that needs that extra brake bite. It doesn’t matter if it is quick stops in traffic or that spirited drive down your favorite backroad. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -Rob_67. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! Shop R1 Concepts Brake Products. ELINE Series Brake Rotors. R1 Carbon GEOMET Series Brake Rotors. R1 Concepts Brake Pads. R1 Concepts Brake Sensors. R1 Concepts Brake Hardware. R1 Concepts Brake Calipers. R1 Concepts Brake Drum. G2 Caliper Paint Kit. What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Other brake product FAQS. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Rear
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: RBC.32003.02
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Black Zinc Plated
  • Interchange Part Number: 2011 2012 2013 2014
  • Brake Pad Compound: Ceramic
  • Images: Images are samples, actual product may vary.
  • Lug/Bolt Circle: 4×100
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Rear Rotor Size (mm): 280
  • Rear Rotor Thickness (mm): 10
  • Vented Or Solid Rear Rotor: Solid
  • Warranty Length: 1 Year Warranty
  • ZINC: Black Zinc Plated

Rear Brake Rotors Drill Slot Ceramic Pads & Sensor For 2011-2014 Mini Cooper
Full_Kit_Carbon_Brake_Rotors_Drill_Slot_OEp_Pads_Hardware_Sensor_CPC_40005_54_01_aki

Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54

Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54
Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54
Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54
Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54
Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54
Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54

Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54
4 Carbon Drilled and Slotted Brake Rotors. 8 Optimum Oep Brake Pads. Please be advised that when you first receive the rotors, they are completely covered with the silver zinc coating. During the initial embedding process, the silver zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -TUNER_BAE. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! Shop R1 Concepts Brake Products. ELINE Series Brake Rotors. R1 Carbon GEOMET Series Brake Rotors. R1 Concepts Brake Pads. R1 Concepts Brake Sensors. R1 Concepts Brake Hardware. R1 Concepts Brake Calipers. R1 Concepts Brake Drum. G2 Caliper Paint Kit. What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Other brake product FAQS. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Front, Rear
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: CPC.40005.54
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Geomet Coating
  • Brake Pad Compound: OE Formulation
  • Images: Images are samples, actual product may vary.
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Warranty Length: 1 Year Warranty
  • ZINC: Geomet Coating

Full Kit Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, Sensor CPC. 40005.54
Front_Carbon_Brake_Rotors_Drill_Slot_OEp_Pads_Hardware_and_Sensor_1PC_32003_57_01_bcia

Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57

Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57

Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57
2 Carbon Drilled and Slotted Brake Rotors. 4 Optimum Oep Brake Pads. Please be advised that when you first receive the rotors, they are completely covered with the silver zinc coating. During the initial embedding process, the silver zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -TUNER_BAE. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! Shop R1 Concepts Brake Products. ELINE Series Brake Rotors. R1 Carbon GEOMET Series Brake Rotors. R1 Concepts Brake Pads. R1 Concepts Brake Sensors. R1 Concepts Brake Hardware. R1 Concepts Brake Calipers. R1 Concepts Brake Drum. G2 Caliper Paint Kit. What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Other brake product FAQS. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Front
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: 1PC.32003.57
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Geomet Coating
  • Brake Pad Compound: OE Formulation
  • Images: Images are samples, actual product may vary.
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Warranty Length: 1 Year Warranty
  • ZINC: Geomet Coating

Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 32003.57
Front_Carbon_Brake_Rotors_Drill_Slot_OEp_Pads_Hardware_and_Sensor_1PC_74007_57_01_ce

Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57

Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57
Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57

Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57
2 Carbon Drilled and Slotted Brake Rotors. 4 Optimum Oep Brake Pads. Please be advised that when you first receive the rotors, they are completely covered with the silver zinc coating. During the initial embedding process, the silver zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I’m also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can’t be beat. Arrived a week early -TUNER_BAE. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. No Code, No Hassle! Shop R1 Concepts Brake Products. ELINE Series Brake Rotors. R1 Carbon GEOMET Series Brake Rotors. R1 Concepts Brake Pads. R1 Concepts Brake Sensors. R1 Concepts Brake Hardware. R1 Concepts Brake Calipers. R1 Concepts Brake Drum. G2 Caliper Paint Kit. What conditions are these items in? All our items are 100% brand new. How long does your brake parts last? The life of the brake parts are based on the drivers’ vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications. However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking. The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details. We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped. A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors. Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random. Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Other brake product FAQS. Cross-Drilled & Slotted Performance Brake Rotors. Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad? How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America’s one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time. Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “r1concepts” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Brand: R1 Concepts
  • Placement on Vehicle: Front
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: 1PC.74007.57
  • Performance Part: Yes
  • Manufacturer Warranty: 1 Year
  • Universal Fitment: No
  • Finish: Geomet Coating
  • Brake Pad Compound: OE Formulation
  • Images: Images are samples, actual product may vary.
  • Please Verify Fitment Notes: Please Verify Fitment Notes Above
  • Warranty Length: 1 Year Warranty
  • ZINC: Geomet Coating

Front Carbon Brake Rotors Drill Slot + OEp Pads, Hardware, and Sensor 1PC. 74007.57