FITS THE FOLLOWING VEHICLES. Fits: Honda Civic Coupe 1993 – 2000 – DX or HX Models ONLY Fits: Honda Civic Hatchback 1990 – 1993 Fits: Honda Civic Hatchback 1994 – 1995 — All Models Except Si With ABS Fits: Honda Civic Hatchback 1996 – 2000 Fits: Honda Civic Sedan 1990 – 1993 — DX or LX Models ONLY Fits: Honda Civic Sedan 1994 – 1996 — All DX or LX Models Without ABS Fits: Honda Civic Sedan 1996 LX – Models With ABS and Manual Transmission ONLY Fits: Honda Civic Sedan 1997 – 2000 – DX or LX or GX Models ONLY Fits: Honda Civic Wagon 1990 – 1991 2WD Models ONLY Fits: Honda Civic Del Sol 1993 – 1997 – Non-V-Tec Models ONLY Fits: Honda CRX DX 1990 – 1991 Fits: Note: Front Rotors Measure 240mm or (9.45). JOIN THOUSANDS OF OUR HIGHLY SATISFIED CUSTOMERS. Please read all fitment information provided above to verify your vehicle has the correct parts. All rotors are precision machined for exact OEM In-stock replacement. Please dont forget to read proper fitment information listed in the check vehicle fits section listed above for your vehicles correct parts. Our Brakemotive brake pads are only included in applicable listings. Please always check the Whats Included section for more information regarding BrakeMotive quality brake pads. Compared to competitors our pads are unmatched in the market. HIGHEST QUALITY VALUE FOR YOUR BUCK. The BrakeMotive brake pads are of highest quality and prevent frequent issues as well as maintenance. This includes issues such as dust, rim coloration, and the overall life expectancy of your brake related parts. FOR FASTER BREAK IN. MORE QUIET BRAKING POWER. QUIET, LOW DUST, CERAMIC FORMULA. MADE FROM ORIGINAL EQUIPMENT SPECS. RUB YOUR FINGER, IS IT DUSTY? SIGN OF POOR NOISE INSULATION. FEEL THE EDGES, SEE THE COLOR? HARSH METAL COMPOUND (FERROUS) MEANS SLOW BREAK-IN AND MORE DUST. SINGLE LAYER METAL SHIM MEANS MORE NOISE AND UNEVEN CALIPER CONNECTION. Kinetic rotors are designed for optimum rotor cooling and durability with one cooling hole per vane. This also provides superior strength to avoid cracking. This insures that the hottest part of the rotor gets cooled. The fact is that the drill holes greatly improve convection heat transfer and the result is more brake pad bite. LEADING IN VALUE AND PERFORMANCE. Cross-drilled rotors keep the brakes up to 150 degress cooler to prevent rotor warping. Therefore your pads last even longer and your rotors still look good. ACTUAL SILVER ZINC PLATING. ELECTRO-CHEMICAL ZINC PLATING IS THE BEST WAY TO PROTECT METAL FROM RUST. SOME BRANDS USE A LIGHT OIL / GREASE FILM COATING OVER THE ROTORS. Brakemotive calipers have been professionally re-manufactured in a qualified facility. Each caliper has been visually and technically inspected to insure original factory standards. This includes the caliper bracket, pistons, and seals as well. The powder coating withstands high temperatures without affecting the OE specs. BrakeMotive Auto-parts ensures quality and product satisfaction with the performance of our braking calipers. Each caliper is re-manufactured on a very carefully examined professional assembly-line. And is thoroughly expected to meet and exceed original factory specifications. ACTUALLY TESTED TO PERFORM BETTER OR AS OE CALIPER. NEW SEALS AND BOOTS. RE-CONDITIONED / MANUFACTURED 100%. NO HARDWARE / BRAKE SEALS. CALIPERS ARE KNOWN TO BE’POORLY’ RE-ASSEMBLED. RE-USED BOOTS / SEALS. SOME RE-MANUFACTURES DON’T REPLACED SEALS OR BOOTS. This is highly considered when we test the pressure output of each caliper. Always check you vehicles fitment information before proceeding with your order. The red powder coating is developed to withstand high temperatures without affecting the OE (original equipment) specifications. Brakemotive calipers offers more than an appealing look, but a strong caliper that works as a team with other connected braking parts. With quality parts such as a caliper your rotors and brake pads have a less chance of improper wear/failure. HIGH HEAT POWDER COATING! High gloss, chemical resistant finish provides easy cleaning, corrosion protection, and a more high performance look. Each caliper is pressure tested in our Chicago facility to prevent leaks and ensure perfect fitment for your car, truck, and SUV. All calipers are professionally re-manufactured with high quality equipment parts. This ensures that the calipers are fully functional to provide you with the stopping power you need. PREMIUM SILICON AND SEALS! During the caliper re-manufacture process the calipers are equipped with new seals and pistons. High temperature tolerance EPDM rubber is also used. Our premium Kinetic Ceramic brake pads offer superior resistance to fade without the noise and dust associated with metal brake pads. Some ceramic brake pad brands tned to be very abrasive on the rotor. A high quality rotor is reccommended with ceramic pads. Most new vehicles come with ceramic brake pads from the facotry. WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), Lead and lead compounds, Antimony oxide (Antimony trioxide), and Nickel (Metallic), which are known to the State of California to cause cancer, and Chromium (hexavalent compounds) which is known to the State of California to cause birth defects or other reproductive harm. UNMATCHED IN THE MARKET. Brakemotive test brakes to the limit to assure the very best in performance and safety. Kinetic rotors and Brakemotive brake pads give you extreme stopping power that is unmatched in the market. All pads are made using positive mold technology for quiet, consistent braking. The brake pads are also chamfered and slotted like the OE, and include with noise preventing dual layer shims. There are many different brands of ceramic brakes, and some manufacturers sell ceramic brakes that have metal in them. A true ceramic brake pads no ferrous metal in it. There is a wide range of brake performance with different ceramic brands. DUAL LAYER RUBBER SHIM. Prevents noisy brake squeal with up to six times more vibration insulation than today’s plain steel shims. THERMAL SCORCHED FOR FAST BREAK-IN. The following Ceramic brake Pads have been thermal scorched to offer superior resistance to fade without the noise and dust associated with quality metallic pads. PREMIUM CERAMIC BRAKE PAD COMPOUND. Provides up to 20% more stopping power than other leading brands. Our Ceramic pads are 100% percent premium ceramic. OEM POSITIVE MOLD TECHNOLOGY. Friction mix is deposited direct in the hot press mold so it flows evenly and maintains the same density. Posi-Mold parts enable consistent fade free performance without noise or squealing. LONG LASTING HIGH QUALITY ROTORS. Cross-drilled rotors can improve stopping power up to 35% over stock rotors as reported in SAE Technical Paper 2006-01-0691. The effect of rotors cross-drilled brake performance. That is why Corvette, Porsche. Mercedes and BMW vehicles come with factory direct with drilled and slotted rotors, i. Not dimpled or slotted. High rotor temperature can cause heat spots to form in the rotor, and this causes pulsating brakes. Cross-drilled rotors keep the brakes up to 150 degrees cooler to prevent rotor warping. OPTIMUM COOLING / DURABILITY. WARNING:This product can expose you to chemicals including Chromium (hexavalent compounds) and Nickel (Metallic), which are known to the State of California to cause cancer, and Chromium (hexavalent compounds) which is known to the State of California to cause birth defects or other reproductive harm. ROUNDED SLOTS ARE BETTER! Every slot is chamfered for a smooth linear transition at the edge. Electro-chemical plating is the best way to protect metal from rust. Some brands use painted rotors that peel or discolor when the rotors get hot. Zinc Plating Does Not Apply To Hub and Rotor Assemblies! Please see item specifics above for details on surface finish. DRILL HOLES PREVENT ROTOR WARPING. Drill holes allow air to flow over and through the vanes to improve convection heat transfer and keep the rotors up to 150 degrees cooler. Our premium rotors are designed with several cooling vanes that keep the rotor from long term negative effects such as warping. Each of our Brake Motive products are 100% certified and tested to insure product satsifaction. In the following charts we have listed our premium brake pads in a carefully analyised testing procedure over a period of 1430 typical foot to pedal braking stops. Our Brake Pads offer sustainable braking power, that has been performance tested to withstand harsh braking enviornments. Our Ceramic and metallic brake pads are leading in the market providing long lasting quality brakes. BRAKEMOTIVE LEADS IN PERFORMANCE. Our Kinetic ceramic brake pads are top quality for performance and customer expectaions for not only our brand leading performing brakes, but an enduring quiet and more smooth riding experiance. Brakemotive is one of the largest brake supplier in North America, with over 250,000 satisfied customers. We only sell premium performance brake kits to assure the very best quality. Because of our large volume, we can offer steep price discounts. In most cases, the delivered price of our perfomance rotor and ceramic brake pad kits is at or below the cost of equivalent plain rotors and brake pads from your neighborhood retail store. Experienced engineering team uses advanced CAD (computer aided design) software to configure the rotor drill holes and slots for best optimum braking. We machine the rotors with state-of-the-art CNC (computer numerical controlled) machines in our mid-west plant with strict quality control. We guarantee a perfect fit to your vehicle, but please check the part fitments information in this listing before your order. Brakemotive products must be installed per the manufacturers instructions. The Brakemotive team members are available to answer your questions Monday through Friday from 8:30AM CST to 6:00PM CST and Saturday from 9:30AM CST to 4:30PM CST. If you can’t find the parts for your vehicle, just give us a call. At Brakemotive replacement parts are always in stock. Brakemotive is one of the largest brake suppliers in North America, with over 250,000 satisfied customers. Not to worry, your order will still get to you quickly and efficiently! Additional charges may be incurred for international callers, please contact your provider for more details. Times vary by country. ALL PARTS MADE TO U. “INTERANTIONAL BUYERS are NOT ELIGBLE for the caliper core return program”. How many brake pads are in a “set”? On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. Is the brake rotor picture the same as the rotor I will receive? The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. Are any modifications nessassary to make these rotors fit my vehicle? No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation. Metallic Vs Ceramic Brake Pads? Ceramic pads are quieter, however, metallic pads are more appropriate from constant tough braking like trucking, hauling, intense highway driving or racing. Will I get Tracking Information? Are the drilled holes and slots directional? Yes, the rotors are machined based on their orientation on the vehicle. Driver’s side (left) and passenger’s side(right) have unique patterns so the slot trails toward the back of the vehicle. What causes rotor warping? Rotor warping is cause from lack of maintenance to a vehicle rotors brakes calipers, and other braking components. Do I have solid rotors or vented rotors? Solid rotors usually contain a single thin solid metal braking surface. Vented rotors have vents/vanes between two solid rotor surfaces. The item “Front Rotors and Calipers with Ceramic Brake Pads For Honda Civic & Del Sol” is in sale since Friday, April 22, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “brakemotive76″ and is located in Chicago, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Brand: Brakemotive
• Manufacturer Part Number: BM6923549393
• Placement on Vehicle: Front
• Rotor Style: Drilled
• Pad Material: Ceramic
• Caliper Color: Red
• Fitment Type: Direct Replacement
• Warranty: 6 Month
• Mounting Hardware Included: Yes
• Caliper Finish: Powder Coated
• Interchange Part Number: 4 lug
• Other Part Number: 19-B1379
• Year Range: 90;91;92;93;94;95;96;97;98;99;00
• Front Rotor Size (inch): 9.45
• Lug Count: 4
• Solid Or Vented Rotors: VENTED
• Solid Or Vented Front Rotor: Vented
• Front Rotor Weight (Lb p/rotor): 9.9
• Images: Images Are Examples, Product (Pad Color) May Vary.
• Lug / Bolt Circle: 4 X 100mm