Tag Archives: rear

front

Front + Rear Rotors withCeramic Pads Elite Brakes (Chevy Malibu HHR Cobalt SS)

May 4, 2020 admin

Fits Models with Rear DISC Brakes ONLY – Will NOT Fit Models with Rear DRUM Brakes. 2004, 2005, 2006, 2007. Fits Models with Rear DISC Brakes ONLY – Fits Models with 11.65 or 296mm Diameter Front Rotors ONLY – Will NOT Fit Models with Rear DRUM Brakes. 2005, 2006, 2007, 2008. Fits New Body Style V6 Sedan ONLY – Fits Models with 11.65 or 296mm Diameter Front Rotors ONLY. Fits FWD Models ONLY – Will NOT Fit RWD LS / LT Models. 2009, 2010, 2011, 2012. Fits Models with 2.0L Turbo Engine ONLY – Fits Models with NON-Brembo Brake Calipers ONLY. Fits Models with 11.65 or 296mm Diameter Front Rotors ONLY. NOTE: The Front Rotors’ Diameter in This Kit measures 11.65 or 296mm. The Rear Rotors’ Diameter in This Kit Measures 10.63 or 270mm. PLEASE CONFIRM YOUR VEHICLE’S SPECIFICATIONS BEFORE ORDERING! ELITE XDS FRONT AND REAR KIT. X4 ELITE XDS BRAKE ROTORS – X8 CERAMIC BRAKE PADS. Please note that the rotors and pads may change in style depending on the car models’ specification. ROTOR AND PAD FEATURES. Helps resisting rust and corrosion from building up on non-frictional surfaces. All Max rotors are reverse engineered from OEM rotors with exact weight and vane counts as Original Equipment. Equipped with rounded slots to wipe away brake dust and cross drilled which reduces braking temperature to prevent uneven wear and warpage. Max carbon ceramic formula minimizes noise, brake dust and vibration. Organic ceramic formula & anti-noise shim ensures a quiet braking experience through & through. Chamfered, slotted & shimmed, maximizing brake performance and consistency. The break-in process is necessary for proper installation to ensure optimal performance. During the process it is common to hear noises and squeals for about a week. Please follow these steps below once you have installed your new set of brakes. Find a safe area to perform the break-in procedure. 5 moderate or aggressive stops at 40MPH/60km to 5MPH/10km without letting the brakes cool down or coming to a full stop. 5 moderate stops at 25MPH/40km to 5MPH/10km and let the rotors cool down after each application. Please note that if you have coated rotors, the coated surface that comes into contact with the pads will rub off during the break-in procedure. Also it is common for some noise and squeals to occur up until a week or two after installation. UPS Surcharge and Other Restrictions May Apply. Alberta, British Columbia, New Brunswick. Newfoundland / Labrador, Nova Scotia, Prince Edward Island. CT, DE, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, VA, VT, WV. IA, IL, IN, KY, MO, NC, TN, WI. AL, AR, GA, KS, MS, ND, NE, OK, SC, SD, MN. AZ, CA, CO, ID, FL, LA, MT, NM, NV, OR, TX, UT, WA, WY. To the following areas and addresses. [X] US Virgin Islands. Processing time is subject to change depending on holiday schedule & volume of orders. AB, BC, MB, QC, SK…………………………………………….. NL, NB, NS, PEI………………………………………………. It DOES NOT cover zinc plating, rusting, pitting or cosmetic damages, normal wear and tear or damages caused by negligence, lack of maintenance, accidents, abnormal operations, track racing, improper installations or services. ABOUT MAX ADVANCED BRAKES. Max Advanced Brakes’ products are manufactured in facilities that follow ISO9002 / QS9000 / TUV / VDA 6.1 World Standards. Our premium quality rotors and brake pads are designed specifically to enhance braking performance in all driving conditions. All of our brake rotors and brake pads follow OEM specifications for exact fitment guaranteed! To ensure the highest of quality and durability, all products have been tested and closely inspected before leaving the factory to the hands of our customers. Our dedicated support staff will be happy to help! The item “Front + Rear Rotors withCeramic Pads Elite Brakes (Chevy Malibu HHR Cobalt SS)” is in sale since Friday, August 7, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “maxautopart” and is located in College Point, New York. This item can be shipped to United States, Canada.

Brand: Max Advanced Brakes
Manufacturer Part Number: KT015183
Pad Material: Ceramic
Other Part Number: 2004 , 2005 , 2006 , 2007 , 2008 , 2009 , 2010
Placement on Vehicle: Left
Rotor Style: Slotted
Warranty: 1 Year
Fitment Type: Direct Replacement

front

Front and Rear Kit Performance Drilled & Slotted Brake Rotors & Ceramic Pads

May 1, 2020 admin

Front and Rear Black Powder Drilled & Slotted Brake Rotor With Ceramic Pads. ALL NEW Drilled and Slotted Brake Rotor Set With Premium Ceramic Brake Pads. This Kit Includes 2 Front Brake Rotors and 1 Set of Front Brake Pads and 2 Rear Brake Rotors and 1 Set of Rear Brake Pads. AGAIN WEEKENDS AND HOLIDAYS ARE EXCLUDED. There is absolutely No modifications required to the product or your vehicle to install the Brake Pads or Brake Rotors. Customer is responsible for fright charges to return the alleged defective product. G3008 Castings Machined To OE Specifications And Designed To An Exact OE Fit. No Modifications Needed For Installation. Cross Drilled To Promote Air Flow To Help Keep The Brakes Cool During Normal Or Aggressive Driving Conditions. Slots Pass Through The Edge Of The Rotor Allowing Water and Debris To Disperse From The Rotor Surface Which Keeps The Brakes Smooth And Quiet. Non Directional Finish Reduces Noise And Makes For An Easy Break In Process. Black Powder Coating looks great out of the box and will continue to look good long after it has been installed. Brake Pad Set Features. Premium Ceramic Brake Pads. No Petroleum Based Based Adhesives To Bond The Friction Materials Together Which Means The Dust That Is Created Will not Stick To Your Wheels. Slotted and Chamfered to Original Equipment Specifications. Duel Layered Rubberized Shims. Q: How quick can I get my order? Q: Do slots really help? A: Absolutely if done right. Slots help clear debris from the friction surface, however slots that do not continue to the rotors edge can actually trap debris. Manufactures that do not slot all the way to the edge often use cheaper metals in the manufacturing process and would crack if slotted to the edge. Q: Why don’t you use zinc plating? A: There are several reasons why we don’t use zinc. Zinc plating is applied at the end of the manufacturing process. This can cause disc thickness variation. Zinc plating does not last very long. Most wheel cleaners will remove zinc plating so if you choose to use zinc plated rotors please read your wheel cleaner labels carefully. Zinc plating can form deposits in the friction material and cause braking issues like vibration or fade. Bottom line is that we choose to provide you with a product that looks great out of the box and will continue to look good long after it has been installed. Q: What makes our brake pads better than the competition? A: There has been extensive testing on the material before it went into production. The material out performs and outlasts other products, is aggressive enough for the driver who goes red light to red light, yet performs just as well for the driver that just wants to cruise and just as good for the highway driver. The Low Dust Formula created for us is exactly as advertised a TRUE LOW DUST material. Ships within 24 Hours- Payments that are received after 1:00 p. The item “Front and Rear Kit Performance Drilled & Slotted Brake Rotors & Ceramic Pads” is in sale since Wednesday, November 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “tripplejsupply14″ and is located in Elgin, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Modified Item: Yes
Rotor Style: Drilled
Country/Region of Manufacture: China
Custom Bundle: Yes
Interchange Part Number: AR8654, PR65099LR, 12066057, 580279, AR8658, 12066065
California Prop 65 Warning: Cancer & Reproductive harm www.p65warnings.ca.gov
Pad Material: Ceramic
Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
OE Replacement: Original Equipment Replacement
Surface Finish: Non Directional
Manufacturer Part Number: G21196; 07; 08; 09; 10; 11; 12; 13; 14; 15
Ceramic Brake Pads: Ceramic
Compatibility: Please check your Compatibility before ordering
Please verify Fitment Notes:: Please verify Fitment Notes in Compatibility Chart
Modification Description: Rotors are Drilled and slotted as well as Black Powder coated the actual braking surface is not coated.
Placement on Vehicle: Left
Other Part Number: Edit
Brand: G21196 Approved Performance
Fitment Type: Direct Replacement
Solid or Vented Rotor: Vented
Warranty: 1 Year
Mounting Hardware Included: No
Bundle Description: This kit includes 2 Front and 2 Rear Drilled and Slotted Brake Rotors with 1 Set of Front and 1 Set of Rear Ceramic Pads.

front

Front and Rear Kit Performance Drilled & Slotted Brake Rotors & Ceramic Pads

April 30, 2020 admin

Front and Rear Black Powder Drilled & Slotted Brake Rotor With Ceramic Pads. ALL NEW Drilled and Slotted Brake Rotor Set With Premium Ceramic Brake Pads. This Kit Includes 2 Front Brake Rotors and 1 Set of Front Brake Pads and 2 Rear Brake Rotors and 1 Set of Rear Brake Pads. It’s very important to make sure these products fit your vehicle. While viewing the listing make sure you use the. “Select Make” “Select Vehicle”. Button and enter your vehicle information. Please make sure you fill in all required information. You will see a. If the products you choose WILL fit your vehicle. Exclamation point if it does NOT fit your vehicle. Please Note there are vehicles with multiple options on them. Please see the “Notes”. Located on the left side of the fitment data. It will provide you with the additional information if it is required. Following these steps will help to ensure you receive the correct products for your vehicle the first time. Thank you for the opportunity to earn you business. AGAIN WEEKENDS AND HOLIDAYS ARE EXCLUDED. There is absolutely No modifications required to the product or your vehicle to install the Brake Pads or Brake Rotors. Customer is responsible for fright charges to return the alleged defective product. G3008 Castings Machined To OE Specifications And Designed To An Exact OE Fit. No Modifications Needed For Installation. Cross Drilled To Promote Air Flow To Help Keep The Brakes Cool During Normal Or Aggressive Driving Conditions. Slots Pass Through The Edge Of The Rotor Allowing Water and Debris To Disperse From The Rotor Surface Which Keeps The Brakes Smooth And Quiet. Non Directional Finish Reduces Noise And Makes For An Easy Break In Process. Black Powder Coating looks great out of the box and will continue to look good long after it has been installed. Brake Pad Set Features. Premium Ceramic Brake Pads. No Petroleum Based Based Adhesives To Bond The Friction Materials Together Which Means The Dust That Is Created Will not Stick To Your Wheels. Slotted and Chamfered to Original Equipment Specifications. Duel Layered Rubberized Shims. Q: How quick can I get my order? Q: Do slots really help? A: Absolutely if done right. Slots help clear debris from the friction surface, however slots that do not continue to the rotors edge can actually trap debris. Manufactures that do not slot all the way to the edge often use cheaper metals in the manufacturing process and would crack if slotted to the edge. Q: Why don’t you use zinc plating? A: There are several reasons why we don’t use zinc. Zinc plating is applied at the end of the manufacturing process. This can cause disc thickness variation. Zinc plating does not last very long. Most wheel cleaners will remove zinc plating so if you choose to use zinc plated rotors please read your wheel cleaner labels carefully. Zinc plating can form deposits in the friction material and cause braking issues like vibration or fade. Bottom line is that we choose to provide you with a product that looks great out of the box and will continue to look good long after it has been installed. Q: What makes our brake pads better than the competition? A: There has been extensive testing on the material before it went into production. The material out performs and outlasts other products, is aggressive enough for the driver who goes red light to red light, yet performs just as well for the driver that just wants to cruise and just as good for the highway driver. The Low Dust Formula created for us is exactly as advertised a TRUE LOW DUST material. Ships within 24 Hours- Payments that are received after 1:00 p. The item “Front and Rear Kit Performance Drilled & Slotted Brake Rotors & Ceramic Pads” is in sale since Wednesday, November 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “tripplejsupply14″ and is located in Elk Grove Village, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation, Bermuda, Maldives.

Modified Item: Yes
Rotor Style: Drilled
Country/Region of Manufacture: China
Custom Bundle: Yes
Interchange Part Number: Toyota, Lexus
California Prop 65 Warning: Cancer & Reproductive harm www.p65warnings.ca.gov
Pad Material: Ceramic
OE Spec or Performance/Custom: OE Spec
Surface Finish: Non Directional
Manufacturer Part Number: J36001, 12, 13, 14, 15, 16,17
Modification Description: Rotors are Drilled and slotted as well as Black Powder coated the actual braking surface is not coated.
Placement on Vehicle: Left
Brand: J36001 Approved Performance
Fitment Type: Direct Replacement
Non-Domestic Product: No
Warranty: 1 Year
Mounting Hardware Included: No
Bundle Description: This kit includes 2 Front and 2 Rear Drilled and Slotted Brake Rotors with 1 Set of Front and 1 Set of Rear Ceramic Pads.

bremaxx

BREMAXX SLOTTED DRILLED FRONT REAR BRAKE DISC ROTORS & H/D PADS PRADO 120 Series

April 25, 2020 admin

BREMAXX SLOTTED DRILLED FRONT REAR BRAKE DISC ROTORS & H/D PADS PRADO 120 Series. Expert spare parts staff. Ask us a Question. Rotor & Pad Combos. BREMAXX DRILLED SLOTTED FRONT and REAR disc BRAKE ROTORS & CERAMIC brake PADS for TOYOTA PRADO 120 Series. We have a New pair of Genuine Bremaxx Directional dimple drilled & slotted (Claw Grooved) Front and Rear Disc Brake rotors with matching Genuine Bremaxx Heavy Duty Ceramic Performance Front and Rear brake pads to suit all standard Toyota Prado 120 series models with standard 338mm (Vented) front and 312mm (Vented) rear diameter factory brakes. These are fantastic “Claw Grooved” Slotted disc rotors come with both slots and dimple holes which are deeper, built for better performance and to extend the life of the disc. Claw Grooved – patented design. Other Unique Advantages to these Rotors are. Zinc Protected with Geomet coating which they are dipped in to protect the rotors from rust and pollution. Hubs painted in High Temperature black paint for an aggressive race appearance. Superior Quality Casting rich in Carbon. Below is a list of models. You will receive One Front Pair slotted and dimpled Claw Grooved (2700cg) and a set of Front Bremaxx Heavy Duty brake pads 1 box of BR1482. You will receive One Rear Pair slotted and dimpled Claw Grooved (793cg) and a set of Rear Bremaxx Heavy Duty brake pads 1 box of BR1200. PLEASE ALSO NOTE: PICTURES DISPLAYED ARE FOR ILLUSTRATION PURPOSE AND MAY NOT DEPICT THE ACTUAL PRODUCT YOU RECEIVE. Bremaxx Claw-Grooved are awesome designed directional Slotted and simple drilled disc rotors, which are deeper slots built for better performance and to extend the life of the disc. These rotors are genuine High Carbon and a top shelf performance rotor. If you have a close up look at the venting system on these rotors, you will see that they are absolute works of art (not cheap knock offs). Bremaxx rotors are the real deal, high quality built to last. Other Bremaxx Features are. They are also Zinc (geomet) coated of anti-rust properties. Genuine Bremaxx disc brake pads. We know you’re keen to receive your order as quickly as possible. We take care to pack every item securely to so it reaches you in brand new condition. Your order will be sent through Australia Post or one of our preferred couriers. All consignments are fully tracked. And we will do our best to make sure you’re happy. Some manufacturers prefer that end users deal directly with them, and others prefer to work through us. And we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you. Each product we sell comes with automatic guarantees that cannot be excluded under Australian law. You changed your mind. Where items are not received by us in brand new resalable condition, we will return them to you once you pay us the cost of redelivery to do so. Where redelivery costs are not paid within 30 days, we will consider the goods abandoned and may dispose of them without liability. For exchanges, we will cover the cost of sending a replacement product back to you. The item arrived damaged or missing parts. All orders leave our warehouse in brand new undamaged condition. It is important that you open your order as soon as you get it, and notify us immediately if there is any damage. So we can report it to our insurer, carrier and warehouse. The item is faulty. We’ve been supplying quality car parts to Australian car owners, enthusiasts and mechanics for over 27 years. With a team of spare parts experts and on-call mechanics we can assist you in working out the correct part for your car. Subscribe to our newsletter to get the latest news & Updates. The item “BREMAXX SLOTTED DRILLED FRONT REAR BRAKE DISC ROTORS & H/D PADS PRADO 120 Series” is in sale since Wednesday, July 8, 2015. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Transmission\Clutches”. The seller is “zoomzoomautoparts” and is located in Dandenong VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: BREMAXX
MPN: DB1482
Manufacturer Part Number: DB1482

front

FRONT + REAR BRAKENETIC SPORT Drilled Slotted Brake Rotors withAKEBONO BSR74934

April 23, 2020 admin

NOTE: Image is a general representation, actual product may differ. ITEM INCLUDE(S): 2 Front Brakenetic Sport Cross Drilled and Slotted Brake Rotors. 2 Rear Brakenetic Sport Cross Drilled and Slotted Brake Rotors. Customer will be responsible for returning detective rotors for inspection. All authorized return merchandise must be in brand new condition. The item “FRONT + REAR BRAKENETIC SPORT Drilled Slotted Brake Rotors withAKEBONO BSR74934″ is in sale since Saturday, April 11, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “brakenetic” and is located in Long Beach, California. This item can be shipped worldwide.

Brand: Brakenetic
Manufacturer Part Number: BNS42100.DS – BNS42101.DS
Placement on Vehicle: Front
Surface Finish: Zinc Plated
Warranty: Yes
Fitment Type: Direct Replacement
Brake Disc Style: Drilled & Slotted

front

Front and Rear Kit Performance Drilled & Slotted Brake Rotors with Ceramic Pads

April 17, 2020 admin

Front and Rear Black Powder Coated Drilled & Slotted Brake Rotors With Ceramic Pads [5.7L V8 MODELS ONLY]. ALL NEW Drilled and Slotted Brake Rotor Set With Premium Ceramic Brake Pads. This Kit Includes 2 Front Brake Rotors 2 Rear Brake Rotors 1 Set of Front Brake Pads and 1 Set of Rear Brake Pads. Complete 4 Wheel Brake Kit. It’s very important to make sure these products fit your vehicle. While viewing the listing make sure you use the. “Select Make” “Select Vehicle”. Button and enter your vehicle information. Please make sure you fill in all required information. You will see a. If the products you choose WILL fit your vehicle. Exclamation point if it does NOT fit your vehicle. Please Note there are vehicles with multiple options on them. Please see the “Notes”. Located on the left side of the fitment data. It will provide you with the additional information if it is required. Following these steps will help to ensure you receive the correct products for your vehicle the first time. Thank you for the opportunity to earn you business. AGAIN WEEKENDS AND HOLIDAYS ARE EXCLUDED. There is absolutely No modifications required to the product or your vehicle to install the Brake Pads or Brake Rotors. Customer is responsible for fright charges to return the alleged defective product. G3008 Castings Machined To OE Specifications And Designed To An Exact OE Fit. No Modifications Needed For Installation. Cross Drilled To Promote Air Flow To Help Keep The Brakes Cool During Normal Or Aggressive Driving Conditions. Slots Pass Through The Edge Of The Rotor Allowing Water and Debris To Disperse From The Rotor Surface Which Keeps The Brakes Smooth And Quiet. Non Directional Finish Reduces Noise And Makes For An Easy Break In Process. Black Powder Coating looks great out of the box and will continue to look good long after it has been installed. Brake Pad Set Features. Premium Ceramic Brake Pads. No Petroleum Based Based Adhesives To Bond The Friction Materials Together Which Means The Dust That Is Created Will not Stick To Your Wheels. Slotted and Chamfered to Original Equipment Specifications. Duel Layered Rubberized Shims. Q: How quick can I get my order? Q: Do slots really help? A: Absolutely if done right. Slots help clear debris from the friction surface, however slots that do not continue to the rotors edge can actually trap debris. Manufactures that do not slot all the way to the edge often use cheaper metals in the manufacturing process and would crack if slotted to the edge. Q: Why don’t you use zinc plating? A: There are several reasons why we don’t use zinc. Zinc plating is applied at the end of the manufacturing process. This can cause disc thickness variation. Zinc plating does not last very long. Most wheel cleaners will remove zinc plating so if you choose to use zinc plated rotors please read your wheel cleaner labels carefully. Zinc plating can form deposits in the friction material and cause braking issues like vibration or fade. Bottom line is that we choose to provide you with a product that looks great out of the box and will continue to look good long after it has been installed. Q: What makes our brake pads better than the competition? A: There has been extensive testing on the material before it went into production. The material out performs and outlasts other products, is aggressive enough for the driver who goes red light to red light, yet performs just as well for the driver that just wants to cruise and just as good for the highway driver. The Low Dust Formula created for us is exactly as advertised a TRUE LOW DUST material. Ships within 24 Hours- Payments that are received after 1:00 p. The item “Front and Rear Kit Performance Drilled & Slotted Brake Rotors with Ceramic Pads” is in sale since Saturday, November 30, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “tripplejsupply14″ and is located in Elgin, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Guernsey, Gibraltar, Jersey, Liechtenstein, Macao, Russian federation.

Modified Item: Yes
Rotor Style: Drilled
Country/Region of Manufacture: China
Custom Bundle: Yes
Interchange Part Number: Dodge, Chrysler
California Prop 65 Warning: Cancer & Reproductive harm www.p65warnings.ca.gov
Pad Material: Ceramic
Compatibility: Please check your Compatibility before ordering
Images:: Images are Samples Only. Actual Product may Vary
Surface Finish: Non Directional
Manufacturer Part Number: C1506, 09, 10, 11, 12, 13, 14, 15
Modification Description: Rotors are Drilled and slotted as well as Black Powder coated the actual braking surface is not coated.
Placement on Vehicle: Left
Other Part Number: 52023, 53024, D1058, D1057
Brand: C1506 Approved Performance
Fitment Type: Direct Replacement
Solid or Vented Rotor: Vented
Warranty: 1 Year
Mounting Hardware Included: No
Bundle Description: This kit includes 2 Front and 2 Rear Drilled and Slotted Brake Rotors with 1 Set of Front and 1 Set of Rear Ceramic Pads.

front

Front & Rear Slotted Drilled Disc Rotors + Brake Pads BA BF FG Fairlane Falcon

April 15, 2020 admin

Front & Rear Slotted Drilled Disc Rotors + Brake Pads BA BF FG Fairlane Falcon. Front and Rear Set with Disc Pads. 2 x Front Slotted + Dimple Drilled Disc Rotors. 2 x Rear Slotted + Dimple Drilled Disc Rotors. Front Set Disc Brake Pad Set. Rear Set Disc Brake Pad Set. Suits Ford – BA BF FG Years 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Incl some – Falcon, Fairmont, Fairlane, LTD, XR6, XR8, RTV, XT, G6, G6E Does not suit Turbo and Performance models with Larger Brakes, PBR Brake Updrade, BF XR + Fairmont Ghia. Please check diameters if unsure. Suspension, Engine & Service Parts. Make sure it fits! Scroll down to check Vehicle Fitment. Suits Ford – BA BF FG Years 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Incl some – Falcon, Fairmont, Fairlane, LTD, XR6, XR8, RTV, XT, G6, G6E. Does not suit Turbo and Performance models with Larger Brakes, PBR Brake Updrade, BF XR + Fairmont Ghia. Dimple Drilled & Slotted. # of Bolt Holes/Studs. The best of both worlds, performance and good looks! You can put your trust in Tora. But fear not, we have created a table with more specific and relevant fitment information for you. This is a vehicle specific part, please make sure your vehicle is listed in our verified table below. Show All Fitment Details. 6cyl Barra 182 4.0L 3984cc. Front LH or Front RH or Rear LH or Rear RH. V8 Barra 220 5.4L 5408cc. 6cyl Barra 190 4.0L 3984cc. 6cyl E-Gas 4.0L 3984cc. Classic XT, Futura, Marlin XLS, RTV, SE, SE XL, SR, SR XT, XL, XLS, XR6, XR6 Magnet, XT. XR6 Turbo, XR6 Turbo Magnet. 6cyl Barra 240T 4.0L 3984cc. 6cyl Barra 245T 4.0L 3984cc. Classic XT, Futura, Marlin XLS, SE, SE XL, XL, XLS, XT. 8cyl Barra 260 5.4L 5408cc. Marlin XLS, RTV, SE, SE XL, SR, SR XT, XL, XLS, XT. XR8, XR8 Devil R, XR8 Enforcer. V8 Boss 260 5.4L 5408cc. ES, Futura, RTV, SR, XL, XLS, XR6, XR6 by Craig Lowndes, XT. ES, Futura, LPG, SR, XL, XLS, XT. EocLPi, G6, G6 50th Anniversary, G6 Limited Edition, G6E, G6E 50th Anniversary, i, i G6/XR6, R6, R6 (Inc XR6), XR6, XR6 50th Anniversary, XT. 6cyl Barra 195 4.0L 3984cc. 6cyl Barra 270T 4.0L 3984cc. Marlin XLS, RTV, Tradesman, Tradesman XL, XL, XLS. Marlin XLS, Tradesman, Tradesman XL, XL, XLS. Marlin XLS, RTV, Tradesman XL, XL, XLS. RTV, XL, XLS, XR6, XR6 Special Edition. 2003 2004 2005 2006 2007 2002 2008 2009 2010 2011 2012. Search more parts for my vehicle. TORA Slotted and Dimple Drilled Disc Rotors and Disc Pads give you the best of both worlds, performance and good looks! You get the looks and cooling efficiency of cross drilled (drilled through) and slotted rotor with the crack resistance of a standard non-drilled rotor since the dimples aren’t drilled through the rotor. TORA Automotive parts are designed and engineered to deliver driving confidence. Manufactured by OEM manufacturers to specified standards. Brakes are vital safety components of a vehicle. We recommend a qualified technician always perform brake component repairs and upgrades. Questions about this product? Every country has different import regulations based on the product’s origin country, type, value and quantity. Please note that not all items can be combined as they do not pack well together. We select the carrier at our discretion to suit your order and area unless you are choosing to use own carrier account. AusPost International Air Express OR DHL Air Express. Tracking information available to most countries. Item is dead on arrival or damaged. There is a manufacturing fault with the item. The wrong item was sent to you. Please choose your parts carefully and make sure you have your correct vehicle information. With your co-operation we will work hard to resolve any issues quickly. The item “Front & Rear Slotted Drilled Disc Rotors + Brake Pads BA BF FG Fairlane Falcon” is in sale since Tuesday, June 26, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs”. The seller is “onlineautoparts” and is located in Warehouse – Brisbane Northside – Virginia QLD. This item can be shipped worldwide.

Brand: Tora
Manufacturer Part Number: FYE129063
Warranty: 1yr / 25,000km
Features: Dimple Drilled & Slotted
Compatible Makes: Ford
Compatible Models: Fairlane,Fairmont,Falcon,Falcon Ute,LTD

1982-92

1982-92 GM F Body Camaro Rear Axle Disc Brake Conversion Kit Cross Drill Slotted

April 14, 2020 admin

Brake Blocks / Lines. Valves / Blocks / Switches. Brake & Fuel Line Clips. Lengths Of Tube With Fittings. Add to Favorite Sellers. Sign up to Newsletter. 1982-92 GM F Body Camaro Rear Axle Disc Brake Conversion Kit Cross Drill Slotted. Pn# – DBK1012JX – Set. 1982-92 GM F-body, Camaro Firebird, Rear Disc Brake Conversion Kit with Cross Drilled and Slotted Rotors. Kit comes with everything pictured, rotors, calipers, hoses, nuts and bolts hardware, caliper brackets, shims, hose tabs, hose clips, banjo bolts, crush washers, loaded calipers with pads, instructions and these are all brand new parts – NOT used parts. This is a bolt on kit. The others don’t have all the pieces for a complete install. Comes with the correct length parking brake cables (NOT GENERIC) and preformed rear axle lines. And at no charge black powder coated calipers. This kit also has the correct size rotors that fit over the axle cap – the others require you to machine down the axle or open up the rotor which requires a machine shop or a lathe. There is a difference. These are the details that separate the first place cars from the rest. We have the highest quality parts in the market place, period. Our parts are developed by people in the United States who know these cars. Thank you for over 3 decades in the automotive business! An Inline Tube Exclusive -Made in The USA – Our customers get the best factory-correct parts on the market, with the correct stamping, and plated finish. Don’t settle for the other guys’ cheap “replacement” parts. Only one company manufactures exact to the factory originals in authentic coated steel – Inline Tube. It is the way it should be – correct and complete. WARNING: This product may expose you to chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. Motorcity Muscle Car offers a variety of products for all classic cars and trucks ranging from. Countless hours and immense research has been spent to ensure that our products are 100% authentic in appearance, application and fit. Located in the heart of “Motor City” Detroit where automobiles are not just transportation, but a way of life! Our staff consists of highly trained sales personal, technical service representatives and mechanical engineers to ensure your receive the best service, the correct information and the highest quality parts on the market. Let us be the source for all of your factory correct muscle car part needs! This means we will not accept a part used on a car, greasy, damaged, bent or without the original box. Resalable means in the same condition as you received it in. Please include pictures of the damaged product AND package in your message. Damages MUST be reported WITHIN 48 HOURS of receipt of the order. Shortages or Incorrect Orders. Count and confirm all items in sealed bags BEFORE opening that bag. Shortages or other issues must be reported WITHIN 48 HOURS of receipt of the order. Motorcity Muscle Car Terms & Conditions. Without limiting the foregoing, Motorcity Muscle Car shall in no way be liable for loss of use or profit, or for other collateral, special or consequential damages. All content on Motorcity Muscle Car storefront designs and listing pages are copyrighted. No part of this strefront or the listings contained within may be reproduced including text, pictures or layout without written permission from Motorcity Muscle Car. At Motorcity Muscle Car, it is important to us to protect the privacy of your personal information. Motorcity Muscle Car does not share or profit from any of your personal data. View more great items. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “1982-92 GM F Body Camaro Rear Axle Disc Brake Conversion Kit Cross Drill Slotted” is in sale since Friday, November 10, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Brakes”. The seller is “motorcitymusclecar” and is located in Romeo, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Luxembourg, Martinique, Nicaragua, Peru, Paraguay, Reunion, Viet nam, Uruguay, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Bermuda, French guiana, Guernsey, Jersey, Jordan, Cambodia, Liechtenstein, Monaco, Macao, Maldives, Pakistan.

Alternate Part Numbers: AFXRD78Z AFXRDM78
Brand: Inline Tube
Country/Region of Manufacture: United States
Interchange Part Number: DBK1012J
Manufacturer Part Number: DBK1012JX
Other Part Number: AFXRD78
Placement on Vehicle: Left
Surface Finish: black phosphate silver zinc bare steel cast oem steel
UPC: Does not apply
Warranty: 90 Day

ford

Ford 9 Rear Disc Brake Kit No E-Brake Drilled/ Slotted Rotors

April 13, 2020 admin

Proportioning / Combo Valves. Special Order Custom Builds. Mopar B & E Body. Mopar A Body 5×4.5. Mopar A Body 5×4. Disc/ Disc Disc/ Drum. Ford 9 Rear Disc Brake Kit No E-Brake Drilled/ Slotted Rotors. Disc Brake Kit NO E-BRAKE The Rear 9 Rear Kit provides an easy to install, bolt on solution for upgrading your pre-1980 Ford passenger car 9&#####x201D; rear-end to disc brake performance. Our kit is unique in that it provides all the brackets and flanges that fit the three most popular sizes of the small bearing 9&#####x201D; rear end. Will fit 8.8″ – 9″ Rear Ends! Does not work with 14 rims. 15 or larger needed with the kit. 3-3/8&#####x201D; x 2&#####x201D; 3-1/2&#####x201D; x 2-3/8&#####x201D; 3-9/16&#####x201D; x 2&#####x201D; This eliminates all guesswork when purchasing and installing the kit and makes what we call a Universal kit! If you have any questions feel free to send us a message, and also check out the axle flange measurements below for compatibility. Rotors are 11.5” O. With 2.8” Hub I. Drilled & Slotted Drilled for Ford 5 x 4.5” w/ 1/2” studs & GM 5 x 4.75” w/ 7/16” stud bolt patterns. Hardware & Brackets for all 3 of the most popular 9 Ford Rear Ends NOTE You will need a larger bore master cylinder and a disc/disc proportioning valve when swapping out your rear drums to disc brakes ALL OF THE PARTS ARE BRAND NEW PARTS! NOTHING REBUILT OR RE-MAN! NOT FOR USE WITH FORD BRONCOS/TRUCKS or LINCOLNS WITH LARGE BEARING REAR ENDS! Check out our Sample Instructions above! Pirate Jack Hot Rod Restoration is your one-stop-shop for quality disc brake conversions, brake boosters, master cylinders, and proportioning valves. We specialize in performance brakes for late fullsize GM cars from 1955-70 and muscle cars from 1962-74, Mopar, Chevy, & Ford. Pirate Jack also carries a full line of parts for Street Rods & Custom Built cars, including pedal assemblies, and hard to find power boosters, GM Restoration Parts, disc brake kits, and suspension products. Check out our tech page for information like how to test a brake booster, how to hook up a proportioning valve, how to plumb my brake lines, how to test my master cylinder and a F. Q’s on how to calculate pedal ratio. We offer FREE tech support on all our disc brake kits and booster conversion kits to take the guess work out of your job. Pirate Jack offers how to guides and instructional videos on our video page. We strive to give you 100% satisfaction and we sincerely want to help you stop your vehicle and install our kits safely. We want your restoration to be easy! We also have some instructional video’s and other helpful support you may need. We give limited support on weekends and are available M-F 7:30-4:30 EST. Your order will be professionally and durably packed for its time in transit to you so we can give you the very best. In addition, you will receive a packing slip to check over your order. Add to Favorite Sellers. Sign up to Newsletter. View more great items. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Ford 9 Rear Disc Brake Kit No E-Brake Drilled/ Slotted Rotors” is in sale since Wednesday, August 8, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “pirate-jack-asheville-nc” and is located in Asheville, North Carolina. This item can be shipped to North, South, or Latin America, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Bangladesh, Brunei darussalam, Egypt, Guernsey, Gibraltar, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Maldives, Pakistan, Reunion, Viet nam.

Modified Item: No
Country/Region of Manufacture: China
Custom Bundle: No
Interchange Part Number: 965-ZDCDS01
Item:: 9″ Rear Disc Brake Conversion Kit
Standard or Performance:: Performance Drilled & Slotted
OE Spec or Performance/Custom: Performance/Custom
Bundle Listing: Yes
Brake Disc Style: Drilled & Slotted
Surface Finish: Driled & Slotted
Manufacturer Part Number: DBK9
Placement on Vehicle: Rear
Other Part Number: 965-ZDCDS01
Brand: Pirate Jack
Fitment Type: Performance/Custom
Non-Domestic Product: No
Warranty: 1 Year

zinc

P2M Zinc Coated Slotted Drilled Rear Brake Rotors 240SX S13 S14 4 Lug 5 Lug New

April 13, 2020 admin

This listing is for a brand new set of Phase 2 Motortrend REAR 240sx brake rotors. OEM replacement rotors slotted / drilled and zinc coated (to prevent rust on the hub), works for all 89-98 240SX ABS and NON ABS. Price per pair of rotors! Nissan: 240sx S13 & S14. When receiving your package, please open all of the boxes immediately to check if all the contents are inside and not damaged. If the product received is defective, a replacement will be sent as soon as possible. I will refuse any damaged or products that are not in good condition. They will inform you on how to proceed based on their policies. All of my products are 100% brand new unless otherwise stated in the description above. As mentioned above, please inspect your order upon receipt. All items (except those exempted) are intended for off road use only, may never be used on public roads and highways. The item “P2M Zinc Coated Slotted Drilled Rear Brake Rotors 240SX S13 S14 4 Lug 5 Lug New” is in sale since Friday, June 2, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “circuitspecr” and is located in Covina, California. This item can be shipped worldwide.

Manufacturer Part Number: P2-S1314RBKR
Brand: P2M
Non-Domestic Product: No
Custom Bundle: No
Fitment Type: Direct Replacement
Modified Item: No
Rotor Style: Drilled
Placement on Vehicle: Left

May 2024
M	T	W	T	F	S	S
« Apr
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31